Shop
-
D-MS-GJ Tiny Series
It can be fixed to the lighting stand with C-clamp on the back. Two D-tap output Weight: 0.3Kg Size: 99.5*85*81mm -
D-MS-CA
It can be fixed in any position in the camera cage with 1/4 thread. Two D-tap output Weight: 0.1Kg Size:… -
-
D-MS Micro V Mount Plate
Micro v mount plate for Dynacore tiny batteries and chargers and the standard version had one D-tap output, four screws and… -
D-MS-970(16.8V)
Input:12V-16.8V NPF Output: 12V-16.8V D-TAP Output:12V-16.8V*2 Weight: 0.20Kg Size: 99.5*66*46mm -
D-MS-NP(7.4V)
Input:12V-16.8V NPF Output: 7.4V D-TAP Output:12V-16.8V*2 Weight: 0.20Kg Size: 99.5*66*46mm -
DT-8S Tiny Battery Charger
Simultaneous 8-channel charging for both channels, only for Dynacore Tiny series batteries. The charger also can charge the normal size… -
DTS-4S Tiny Battery Charger/Adaptor
Simultaneous 4-channel charging for both channels, only for Dynacore Tiny series batteries. The charger and adapter function can work simultaneously. -
DT-4S Tiny Battery Charger/Adaptor
Simultaneous 4-channel charging for both channels, only for Dynacore Tiny series batteries. Charging of Li-ion battery is done through a… -
DD-VP Tiny Battery Charger
Simultaneous 2-channel charging for both channels, only for Dynacore Tiny series batteries. The charger and adapter function can work simultaneously. -
DPM-155S Tiny V-Mount Li-ion Battery
This pocket fit size battery is designed for the applications which require compact size power, like handheld stabilizers, focus puller monitor,… -
DPM-98S Tiny V-Mount Li-ion Battery
This pocket fit size battery is designed for the applications which require compact size power, like handheld stabilizers, focus puller monitor,… -
DPM-65S Tiny V-Mount Li-ion Battery
This pocket fit size battery is designed for the applications which require compact size power, like handheld stabilizers, focus puller monitor,… -
DS-12S/A 12 Channel Simultaneous Li-ion Battery WALL-Mounted Charger
Simultaneous 12-channel charging for both channels. Charging of Li-ion battery is done through the V-Mount\Gold Mount plate. Universal AC input voltage for… -
D-10S/A 10 Channel Simultaneous Li-ion Battery Charger
Simultaneous 10-channel charging for both channels. Charging of Li-ion battery is done through the V-Mount\Gold Mount plate. Universal AC input voltage for… -
D-TRAVEL
D-TRAVEL charger can charge all our batteries with B port directly. Ultra-portable. Single charger. Charge through D-tap. -
D-TRAVEL-2
◆ Portable charger to charge batteries through the D-Tap connector. ◆ Dual D-Tap connectors are equipped, 2 batteries can be… -
DF-4S V-Mount Battery Fast Charger
DF-4S can charge the batteries simultaneously at Max 5A fast charging current. The charging speed is quite faster than normal… -
D-4S V Mount Charger
Simultaneous 4-channel charging for all the 4 channels. Charging of Li-ion battery is done through V mount. -
DC-2S/A V-Mount/Gold Mount Battery Charging/Discharging
Work as both charger/discharger, 2 channel work simultaneously. Charging/Discharging of Li-ion battery is done through V-Mount/Gold Mount plate. Discharging function… -
DF-2S/A V-Mount/Gold Mount Battery Fast Charger
DF-2S/A can charge the batteries simultaneously at Max 5A fast charging current. The charging speed is quite faster than normal… -
DS-2S V-Mount Battery Charger/Adaptor
2-channel charger with adapter, V-Mount and Gold Mount. The charger and adapter function can work simultaneously. Simultaneous 2-channel charging for… -
D-2SN V-Mount Battery Charger
Simultaneous 2-channel charging for both channels. Charging of Li-ion battery is done through the V-Mount plate. Universal AC input voltage… -
D-4PT Adapter Cables
From 1 male D tap input to 4 female D tap output. Max current of each D tap output is… -
D-USB Adapter Cables
From 1 D tap to 2 USB output. Built-in identification resistance for APPLE products, it can charge Iphone & Ipad… -
D-B Adapter Cables
Convert from Power Tap Plug (Male) to DC connector Weight: Approx 0.05Kg Length: 60cm -
DHBC-4 26V Battery Charger
Simultaneous 4-channel charging for all the 4 channels. Charging of 26V Li-ion battery is done through V mount. -
DHBC-T 26V Battery Charger
Simultaneous 2-channel charging for all the 2 channels. Charging of 26V Li-ion battery is done through V mount. -
D-4SAD 14.8V/26V Battery Charger
2-channel charger designed to charge both 14.8V&26V batteries. 2pcs 14.8V / 2pcs 26V / 1pc 14.8V&1pc 26V batteries can be charged… -
D-4BS/A Battery Extender
D-4BS/A is a portable power supply unit through 4 channels V-Mount and Gold Mount batteries. The 2 channels output of… -
D-4S/A-48V 48V Skypanel Power Adapter
Integration of both battery adapter and charger function in one device. 48V, 10A& 28V, 10A adapter output are available, support… -
DS-260S 260Wh High Load V-Mount Battery Pack
● Light weight, compact, high-performance Lithium-ion battery pack. ● The five-step LED power status indicator shows accurately remaining battery capacity.… -
D-2BS/A-24 Battery Extender
D-2BS/A-24 is the power station designed to integrate the power of 2pcs V-Mount and Gold Mount batteries into a power… -
DS-190S 190Wh V-Mount Battery Pack
● Light weight, compact, high-performance Lithium-ion battery pack. ● The five-step LED power status indicator shows accurately remaining battery capacity.… -
DS-160S 160Wh V-Mount Battery Pack
● Light weight, compact, high-performance Lithium-ion battery pack. ● The five-step LED power status indicator shows accurately remaining battery capacity.… -
DN-310S 310Wh High Load V-Mount Battery Pack
DN series batteries have an innovative dual housing structure: the inner cell cage and outer anti-shock housing. The new structure… -
DN-170S 170Wh High Load V-Mount Battery Pack
DN series batteries have an innovative dual housing structure: the inner cell cage and outer anti-shock housing. The new structure… -
DS-150SI Built-in Charger V-Mount Battery
● Internal Charger Battery V-Mount. ● Lightweight, compact, high-performance Lithium-ion battery pack. ● It can be charged by itself without… -
DS-130SI Built-in Charger V-Mount Battery
● Internal Charger Battery V-Mount. ● Lightweight, compact, high-performance Lithium-ion battery pack. ● It can be charged by itself without… -
DS-95SI Built-in Charger V-Mount Battery
● Internal Charger Battery V-Mount. ● Lightweight, compact, high-performance Lithium-ion battery pack. ● It can be charged by itself without… -
DM-155S 155Wh V-Mount MINI Li-ion Battery
Dynacore newly launches DM series Li-ion professional camera battery. It features compact size(127*90*52 mm, 0.8KG) and high capacity.12pcs imported 18650… -
DM-95S 95Wh V-Mount MINI Li-ion Battery
Dynacore newly launches DM series Li-ion professional camera battery. It features compact size(127*90*52 mm, 0.8KG) and high capacity.12pcs imported 18650… -
D-310MS 310Wh V-Mount MINI Li-ion Battery
Dynacore newly launches D series Li-ion professional camera battery.It adopts an innovative double housing structure. Inner housing isolates the cells… -
D-200MS 200Wh V-Mount MINI Li-ion Battery
Dynacore newly launches D series Li-ion professional camera battery. It adopts an innovative double housing structure. Inner housing isolates the cells from… -
D-155MS 155Wh V-Mount MINI Li-ion Battery
Dynacore newly launches D series Li-ion professional camera battery. It adopts an innovative double housing structure. Inner housing isolates the cells from… -
D-130MS 130Wh V-Mount MINI Li-ion Battery
Dynacore newly launches D series Li-ion professional camera battery. It adopts an innovative double housing structure. Inner housing isolates the cells from… -
D-95MS 95Wh V-Mount MINI Li-ion Battery
Dynacore newly launches D series Li-ion professional camera battery. It adopts an innovative double housing structure. Inner housing isolates the cells from… -
DD-200S/A 200Wh Digital Li-ion Camera Battery With LED Screen Display
Discharging time in hours&minutes, remaining capacity percentage, battery voltage and discharging cycles are displayed on big LED screen, battery info… -
DD-130S/A 130Wh Digital Li-ion Camera Battery With LED Screen Display
Discharging time in hours&minutes, remaining capacity percentage, battery voltage and discharging cycles are displayed on big LED screen, battery info… -
DD-95S/A 95Wh Digital Li-ion Camera Battery With LED Screen Display
Discharging time in hours&minutes, remaining capacity percentage, battery voltage and discharging cycles are displayed on big LED screen, battery info… -
Twister by Betz-Tools
Frame your pictures free in all axis and don’t care anymore about the horizon it’s perfect leveled with your added… -
Volt Kit for Betz-Tools RIG
Volt for Betz-Toos RIG The Tiffen Volt™ is not just a horizon stabilizer, gyro smarts on the gimbal of the… -
Shoulder Mount by Betz-Tools
“Fly like an Eagle” Universal Camera Shoulder Support for a quick change-over from: Hand-Camera to Steadicam® or tripod and reverse.… -
Universal Monitorbracket by Betz-Tools
Universal Monitorbracket with Antivibration Bushings®, any monitor position in each Steadicam® configuration is possible. -
Panther – Starter Tracks
The Standard Starter Track enables an easy way to bring your dolly on low tracks. It is available for our… -
Panther – Rubber Track
10 m / 33 ft. as compact as possible The Panther Rubber Track (204804) is a cost-effective Broadcast track that… -
Panther Broadcast Track
Plastic and Aluminum The Panther Broadcast Track is a cost-effective way to bring your dolly on tracks. It is available… -
PANTHER PRECISION VARIO TRACK
The Precision Vario Track is manufactured of aluminum and offers because of a specifically constructed Double-T-Design a lightweight construction with… -
PANTHER PRECISION STEEL TRACK
The Precision Steel Track is manufactured of a stainless steel tube in combination with an aluminium beam. This construction is… -
Panther Precision Mono Track
The Panther Precision Mono Track has a great new design. A "triangle profile", the maximum length of 5,5 m /… -
Panther Precision Track
The Panther Precision Track is designed equally to the Precision Leveling Track. The only difference is that it comes without the… -
MAXIMUS 7 by SpaceCam Systems Inc. Remote Head
Maximus 7 by Spacecam employs a completely new proprietary approach to alleviate external rotational disturbances. It is silent in studio… -
Panther TRIXY Remote Head
The Trixy Remote System is a real jack of all trades. With up to three axes, cameras can be moved… -
-
Panther Tower-Rigging
The Panther Tower provides new ideas and unprecedented shooting for a cost-effective price. With electrically powered movements and remote control,… -
Panther VacuRigg
The VacuRigg System is ideal for mounting cameras, lights or other accesories on all smooth surfaces like windows, cars, walls… -
Panther Multi Mount
The Multi Mount system is ideal for mounting cameras, lights or other accessories on all smooth surfaces. Depending on how… -
Panther Super Jib II
Get the most out of your Panther dolly The Panther Super Jib II (109796) is the most advanced version of… -
Panther Super Jib
Perfect for 1 person The Super Jib I (100504) extends your dollys maximum height. It is designed to enable an… -
Panther U-Bangi Slider XY
The worldwide used U-Bangi-Slider system has been extended. From now you can combine 2 sliders to make movements into the… -
Panther U-Banger Slider
With the new U-Bangi-Slider system Panther extends the already well-established U-Bangi II with many additional new features. Thus, the U-Bangi-Slider… -
Panther Foxy Pro Air
The Foxy Pro Air is a special version of the well known Foxy Pro Crane system. It differs mainly through… -
Panther Pixy Plus Crane
PIXY PLUS So capable, that you want to take it anywhere. So light and compact, that you can do. The… -
Panther Universal Dolly
Probably the most simple way for a professional camera movement: the Panther Universal Dolly (149059) can be used as a… -
Panther Twister Dolly with pneumatic + track wheels
Twist closer to the action The Twister Doorway Dolly offers you new possibilities concerning mobility and flexibility. Maximum mobility and… -
Panther Husky Dolly
The Husky Dolly is a safe base not only for the cameraman and the camera, but also for lightweight cranes… -
Panther Roller Plate Dolly
The most compact Panther Dolly The lightweight Roller Plate (171073) is the ideal dolly for productions where space is limited.… -
Panther Easy Rider Dolly
Familiar but still all new The standard version of the Easy Rider is a manually operated rickshaw dolly. An additionally… -
Panther Flex Grip Kit
Universal Modular System The Flex Grip Kit is a universal modular system for multi-purpose use. It can be extended according… -
Atlas Lens-21mm Orion Series Anamorphic Prime
Orion Series 21mm - The world’s widest front anamorphic cinema lens in production Interchangeable Mount System with native PL or… -
Atlas Lens-Orion Silver Edition 6-Lens Set
Express Your Vision For the Silver Screen: Introducing the Orion Series Silver Edition The Silver Edition lenses maintain the modern,… -
Zacuto ZipGear Universal (any lens)
Zacuto Universal ZipGear is a .8 pitch strap that can be connected to any lens for use with a Zacuto… -
Zacuto ZipGear Prime Lens Kit
Zacuto Universal ZipGear Prime Lens Kit includes four Zacuto Universal ZipGear. Zacuto Universal ZipGear is a .8 pitch strap that… -
Zacuto Zip Gear Replacement
A 13.5" (size can vary up to .45") strand of zip gear with no metal housing unit. -
Zacuto Zicro Micro
The Zicro Micro is used to mount any device with a ¼” 20 or a 3/8”16 (with a 3/8 16 to… -
Zacuto Zarn
The Zarn, inspired by filmmaker Clinton Harn, is a railed mounted wood handgrip. It slides onto any Z-Rail, or any… -
Zacuto Zamerican Z-Rail Small Arm
The Zamerican Z-Rail Small Arm is a 6” articulating arm that has two Z-Rail clamps on either end. Install the… -
Zacuto Zamerican Z-Rail Large Arm
The Zamerican Z-Rail Arm is a 12” articulating arm that has two Z-Rail clamps on either end. Install the included… -
Zacuto Hand Strap
The Zacuto Hand Strap can be used with any of our cages for a secure and comfortable grip on the… -
Zacuto Z-Rail Rosette Mount
The Z-Rail Rosette Mount is a multi-functioning Z-Rail (NATO) rail mount. It slides onto any Rail and it gives you… -
Zacuto Z-Rail Rod Lock 90 Degree
The Z-Rail Rod Lock 90 Degree attaches to any Z-Rail and gives a 15mm rod port perpendicular to the Z-Rail.… -
Zacuto Z-Rail Rod Lock
The Z-Rail Rod Lock attaches to any Z-Rail and gives a 15mm rod port along the side of the Z-Rail.… -
Zacuto Z-Rail Ball Mount
The Z-Rail Ball mount is a universal mount used to attach monitors, recorders and other accessories to camera rigs via… -
Zacuto Z-Rail Axis Mount
The Z-Rail Axis Mount is perfect for mounting an Axis Mini or Micro EVF Mount with a rosette based EVF.… -
Zacuto Z-Mount Zwivel 2
The Z-Mount Zwivel 2 combines our Zwivel technology with two quick release ratcheting levers to create a multipurpose mount. Each… -
Zacuto Z-Finder Mounting Frame Thumbscrew
Single replacement thumbscrew for any Z-finder Mounting Frame. -
Zacuto Z-Finder Mounting Frame Slide Kit
This replacement kit will attach any Zacuto Z-finder Mounting frame to a DSLR Gorilla Plate Includes two thumbscrews, slide with… -
Zacuto Z-Finder 3.2″ Mounting Frame for Small DSLR Bodies with Battery Grips
The Z-Finder 3.2" Mounting Frame for Small DSLR Bodies with Battery Grips is for use with the DSLR Gorilla plate… -
Zacuto Z-Finder 3″ Adhesive Frame
This frame is for use with our line of Z-Finder Viewfinders. It is compatible with the Z-Finder Pro 2x and… -
Zacuto Z-Finder 3 inch Mounting Frame for Small DSLR Bodies with Battery Grips
The Z-Finder 3" Mounting Frame for Small DSLR Bodies with Battery Grips is for use with the DSLR Gorilla plate… -
-
-
-
-
Zacuto Z-Drive Height Adjuster
The Z-Drive Height Adjuster gives you more range on positioning our Z-Drive Follow Focus, accommodating for different lens barrel sizes… -
Zacuto Z-Drive
The Zacuto Z-Drive is a unique, universal direct drive follow focus, designed with single operator shoulder mounted rigs in mind.… -
Zacuto Z-Bands
Z-Bands are compatible with the Z-Finder Pro and V2. They are not compatible with the Z-Finder Jr. The Z-Bands are… -
Zacuto Z CAM USB Clamp & HDMI Clamp
The USB Clamp and HDMI Clamp screw directly into the Z CAM E2 and E2 Flagship cameras including Z CAM… -
Zacuto Z CAM E2 and E2 Flagship Cage
Our Z CAM E2 and E2 Flagship Cage is compatible with Z CAM E2, E2G, E2-S6, E2-F6, E2-F8 camera bodies.… -
Zacuto Wooden Trigger Grip
The Trigger Grip is our comfortable, sleek wooden handgrip. The Trigger Grip attaches to an M6 Rosette, such as the… -
Zacuto Wooden Handgrip
The Wooden Handgrip is our comfortable, sleek wooden handgrip. Slide this into the sleeve of our Trigger Arm for a… -
Zacuto Wooden Dual Trigger Grips
The Wooden Dual Trigger Grips is a dual handgrip system that gives you two sleek comfortable wooden handgrips. The Dual… -
Zacuto VCT Tripod Plate
The VCT Tripod Plate adapts any standard tripod head into a VCT-14 style tripod. This tripod Plate will accept the… -
Zacuto VCT Rotator
The Zacuto Rotator is an L shaped camera bracket used to shoot vertical (9:16) video. The Rotator is compatible with… -
Zacuto VCT Pro Tripod Dock
The VCT Pro Dock allows you to quickly take you camera off the VCT Pro Baseplate and slide it onto… -
Zacuto VCT Pro Top Plate
The VCT Pro Top Plate is made specifically for the VCT Pro Baseplate. It allows you to quickly adjust the… -
Zacuto VCT PRO Jr. Baseplate
The VCT Jr Baseplate is Arca Swiss on the top and VCT14 on the bottom. This plate has all the… -
Zacuto VCT PRO Baseplate
The VCT PRO Baseplate is compatible with a wide range of cameras, including popular models from Canon, Sony, BlackMagic, Panasonic, RED,… -
Zacuto Universal Cage for DSLR and DSLM Cameras
The Universal Cage for DSLR and DSLM Cameras is a height adjustable cage, accommodating a wide range of camera sizes.… -
Zacuto Trigger Arm
The Trigger Arm includes just the sleeve to use our Trigger Grip Relocators or wooden Handgrip. This allows you to… -
Zacuto Tornado
The Tornado grip connects to the Zacuto Z-Drive (not included) follow focus via a standard whip port. Due to the… -
Zacuto The Director’s Rig for Mobile phones
The Director Kit provides the tools you need to deliver the perfect shot with your mobile phone. Focus and frame… -
Zacuto The Cinematographer’s Rig for Mobile phones
The Cinematographer Kit provides the tools you need to deliver the perfect shot with your mobile phone. Focus and frame… -
Zacuto Tactical Handle
Our most versatile handle! With the turn of one ratcheting lever, this handle can be a top handle, left hand… -
Zacuto SSD Holder
The Samsung SSD slides into the SSD Holder from one end and clamps in place by a turn of a… -
Zacuto Spacer Plate
The Spacer plate was designed with the combination of the Canon 18-80 lens and the Canon C200 or Panasonic EVA1… -
Zacuto Sony Trigger Grip- works with FX6, FS5 and FS5 Mark II
The Sony Trigger Grip is a single handgrip that relocates the Sony FX6, FS5 and FS5 mark II cameras grip… -
Zacuto Sony Relocator – works with Sony FX6, FS5 and FS5 Mark II
The Sony Relocator moves the Sony FX6, Sony FS5 and FS5 Mark II camera grip to a comfortable position for… -
Zacuto Sony FX9 Trigger Grip
The Sony FX9 Trigger Grip is the most adjustable handgrip for the Sony FX9. It also will work with the… -
Zacuto Sony FX9 Recoil Pro
Sony FX9 Recoil Pro V2 is a shoulder rig designed specifically for the Sony FX9 camera. This is a Next… -
Zacuto Sony FX9 Dual Trigger Grips
The Sony FX9 Dual Trigger Grips is a dual handgrip system that relocates the Sony FX9 camera grip to a… -
Zacuto Sony FX6 Z-Finder Recoil Rig
The Sony FX6 Z-Finder Recoil Rig is a shoulder rig designed specifically for the Sony FX6 camera. This is a… -
Zacuto Sony FX6 Z-Finder
The Zacuto Sony FX6 Z-Finder is specifically designed to suit the shape and size of the monitor included with the… -
Zacuto Sony FX6 Top Plate
Sony FX6 Top Plate contours to the shape of the Sony FX6 camera, around Sony’s top handle. The top plate… -
Zacuto Sony FX6 Recoil Rig
The Sony FX6 Recoil Rig is a shoulder rig designed specifically for the Sony FX6 camera. This is a Next… -
Zacuto Sony FS7 Recoil Pro V2
The Sony FS7 Recoil Pro V2 is a shoulder rig designed specifically for the Sony FS7 camera. This is a… -
Zacuto Sony FS7 & FX9 Top Plate
The Sony FS7 & FX9 Top Plate attaches to the top of the Sony FS7, Sony FS7 II or Sony… -
Zacuto Sony Dual Trigger Grips – works with FX6, FS5 and FS5 Mark II
The Sony Dual Trigger Grips works with FX6, FS5 and FS5 Mark II. The Sony Dual Trigger Grips is a… -
Zacuto Sony Basic Cage- Arca Swiss Compatible
The Sony A7III/A7RIII/A9 Cage is our “no-cage” cage - lightweight and compact, and compatible with Zacuto's own Arca Swiss- The… -
Zacuto Sony A7S III Cage
The cage screws into the bottom of the camera with a provided ¼"-20 screw. It also attaches to the side… -
Zacuto Sony A7R IV Cage
The Sony A7R IV Cage is our “no-cage” cage - lightweight and compact, and compatible with Zacuto's own Arca Swiss-… -
Zacuto Smart Z-Finder Diopter Kit
Smart Z-Finder Diopters are a pack of diopters with these strengths: +.5, +1, +1.5, and +2 to add to your… -
Zacuto Smart Z-Finder Anti-Fog Shields
The Smart Z-Finder Anti-Fog Shields includes 3 anti-fog shields to use with your Smart Z-Finder to help eliminate fogging. -
Zacuto Smart Z-Finder – Viewfinder for Smartphones
If you have a smartphone (and who doesn't?). You need this. A game-changing accessory for smartphone content creators. Designed to… -
Zacuto Shoulder Stock for Smart Z-Finder
A Simple Chest Stabilizer for iPhones and mobile phones alike. The Shoulder Stock is an additional point of contact and… -
Zacuto Shorty Trigger Grips
Our Shorty Trigger Grips are short and sweet. They come as they are with no customization! They offer you 8”… -
Zacuto SDI & HDMI Replacement Covers
Includes both HDMI In and Out and SDI In and Out. Compatible with both the Gratical HD and the Gratical… -
Zacuto Scissor Lens Support
The Scissor Lens Support is compatible with Fujinon MK lenses. It attaches to the base of your lens with included… -
Zacuto Rotator Kit
The Rotator Kit is everything you need to add to your Next Generation Recoil Rig to be able to rotate… -
Zacuto Rosette Trigger Mount
The Rosette Trigger Mount is a compact trigger rosette to easily mount any Arri rosette handgrip on your rig. It… -
Zacuto Rosette Trigger Grip
The Rosette Trigger Grip is a single handgrip that relocates any rosette based camera/lens grip to a comfortable handgrip position… -
Zacuto Rosette Relocator
The Rosette relocator moves any rosette based camera/lens grip to a comfortable handgrip position for shoulder rigs. Slide this into… -
Zacuto Rosette Dual Trigger Grips
The Rosette Dual Trigger Grips is a dual handgrip system that relocates the any any rosette based camera/lens grip to… -
Zacuto Rod Cap
Rod caps are 1/2" threaded and screw into our rods. Prevent your equipment from accidentally sliding off of your rods… -
Zacuto Right Trigger Grip for 15mm Rod
This is our 15mm rod based wooden handgrip designed for your right hand, click here for left hand model. It… -
Zacuto Right Rosette Trigger Handgrip
The Right Rosette Trigger Handgrip is a very compact low profile trigger grip that rotates 360 degrees with a simple… -
Zacuto Right Angle Extension cable for Canon 18-80
The Right Angle Extension Cable allows you to extend the relocator cable of the Canon 18-80 lens grip an additional… -
Zacuto Regulated FS5 power cable
Power-Con 2-pin (male) to FS5 45cm Length Power-Con (D-Tap) FS5 jack regulator to 12v -
Zacuto RED KOMODO Cage Top Plate
The RED KOMODO cage is a very modular design. You can use each part individually or in any combination. This… -
Zacuto RED KOMODO Cage Side Plates
The cage for RED KOMODO is a very modular design. You can use each part individually or in any combination.… -
Zacuto RED KOMODO Cage Kit with Kameleon PRO EVF
This kit includes: RED Komodo Cage Kit- top plate, bottom plate, two sides plus the Tactical Handle and The… -
Zacuto RED KOMODO Cage Base Plate
The RED KOMODO cage is a very modular design. You can use each part individually or in any combination. This… -
Zacuto Ratcheting Lever Kit
The Zacuto ratcheting levers are fully adjustable in the field. It’s great when tightening or loosening a lever in a… -
Zacuto Ratcheting Lever
The Zacuto ratcheting levers are fully adjustable in the field. It’s great when tightening or loosening a lever in a… -
Zacuto Q-Mount Lightweight
The Zacuto Q-Mount for 15mm lightweight spaced (60mm) rods clamps onto 15mm rods to create a stable mount for a… -
Zacuto Polaris Shoulder Pad
The Polaris Shoulder pad is an Arca- Swiss compatible shoulder pad. Any Arca-Swiss compatible plate can slide into the shoulder… -
Zacuto Polaris Rod Support with 12″ Rods
The Polaris Rod Support Base w/ 12” Rods accepts the Polaris QR Plate. Screw the Polaris QR Plate into the… -
Zacuto Polaris Baseplate
The Polaris Baseplate is the perfect baseplate for any Mirrorless camera or DSLR camera- with Zacuto cage or cageless. The… -
Zacuto Panasonic S5 Cage
The Panasonic S5 Cage is our “no-cage” cage - lightweight and compact, and compatible with Zacuto's own Arca Swiss- The… -
Zacuto Panasonic Lumix S5II & S5IIX Cage
The Panasonic S5II and S5IIX Cage is super lightweight, compact, and compatible with Arca Swiss. It packs in a ton… -
Zacuto Panasonic GH6 Cage
Lightweight, compact, and ready to accommodate any shooting style, the GH6 camera cage is the perfect addition for your camera.… -
Zacuto Panasonic GH6 ACT Recoil Rig
The ACT Panasonic GH6 Recoil Rig is an Arca-Swiss compatible shoulder rig with a lightweight camera cage. Designed specifically for… -
Zacuto Panasonic BGH1 & BS1H Cage
A slim form fitting cage for Panasonic's newest box cameras, the BS1H and BGH1. This cage is a very modular… -
Zacuto Oval Large Eyecushion #4010
104mm x 82mm, Compatible with: Zacuto: Z-Finder; Gratical Eye; Gratical HD; Gratical X, Kameleon EVF and any other Zacuto finder… -
Zacuto Nucleus Trigger Grip Mount
The Nucleus Trigger Grip is a compact grip mount to easily attach the Nucleus M controller on your rig. It… -
Zacuto Nucleus Relocator Right
When working with the Nucleus M wireless lens controller, the Nucleus Relocator moves the right sided focus grip to a… -
Zacuto Nucleus Relocator Left
When working with the Nucleus M wireless lens controller, the Nucleus Relocator moves the focus grip to a comfortable shoulder… -
Zacuto Nucleus Dual Trigger Grips
The Nucleus Dual Trigger Grips is a dual handgrip system that relocates the Nucleus M FIZ handgrips to a comfortable… -
Zacuto Nikon Z6/Z7 Cage
The Nikon Z6/Z7 is our “no-cage” cage - lightweight and compact, and compatible with Zacuto's own Arca Swiss- The 'ACT… -
Zacuto Nikon FTZ Adapter
This adapter is required if you are using the Nikon FTZ mount adapter on your Nikon Z6/Z7 camera with our… -
Zacuto Mini Z-Rail
This is the perfect accessory if you have multiple accessories you’d like to mount with our Zamerican Z-Rail Arm. Install… -
Zacuto Micro Mixer
The on-board audio MICRO Mixer is the first dual channel microphone mixer designed specifically for mobile phone video, but also… -
Zacuto MICRO Boom
The MICRO Boom is a lightweight on-camera audio boom pole designed for use on mobile phones, DSLR, mirrorless, ENG cameras,… -
Zacuto Left Trigger Grip for 15mm Rod
This is our 15mm rod based wooden handgrip designed for your left hand. It attaches to any standard 15mm rod,… -
Zacuto Left Rosette Trigger Handgrip
The Left Rosette Trigger Handgrip is a very compact low profile trigger grip that rotates 360 degrees with a simple… -
Zacuto LANC Extension Cable 13.8″
This 13.8" LANC extension cable makes it easy to extend the control range of the your camcorder or use a… -
Zacuto Kameleon Pro EVF for RED Raptor XL
The Kameleon PRO EVF for RED Raptor XL includes the Kameleon EVF Pro with 12” combined 2 pin LEMO to… -
Zacuto Kameleon Pro EVF for RED Raptor
The Kameleon PRO EVF for RED Raptor includes the Kameleon EVF Pro with 24” combined 2 pin LEMO to 4… -
Zacuto Kameleon EVF Battery Pack
Free yourself from large expensive system batteries and power cables by using the Kameleon Battery Plate. -
Zacuto Gripper P-Tap Adapter – No cable
The Gripper P-Tap Adapter with no cable turns one P-Tap output into four. It snaps directly into any P-Tap outlet. -
Zacuto Gripper P-Tap Adapter
The Gripper P-Tap Adapter turns one P-Tap output into four via a 15” cable. It conveniently clamps directly to a… -
Zacuto Gratical Eye EVF Battery Pack
Free yourself from large expensive system batteries and power cables by using the new Gratical Eye Battery Plate. -
Zacuto GH5 Metabones Cine Adapter
The Zacuto GH5 cage is equipped to support a Metabones Cine adapter with the addition of this adapter piece. Screw… -
Zacuto GH5 Basic Cage- ACT Compatible
The GH5 Cage is our “no-cage” cage compatible with the Panasonic GH5, GH5S, and GH5M2. It is lightweight and compact,… -
Zacuto Fuji X-T3 Cage
The Fuji X-T3 Cage is our “no-cage” cage - lightweight and compact, and compatible with Zacuto's own Arca Swiss- The… -
Zacuto FS7 Trigger Grip
The FS7 Trigger Grip is the most adjustable handgrip specifically for the Sony FS7. It allows for single-handed 360° rotation… -
Zacuto FS7 II Trigger Grip
The Sony FS7 II Trigger Grip is the most adjustable handgrip specifically for the FS7 II. It allows for single-handed… -
Zacuto FS7 II Dual Trigger Grips
The Sony FS7 II Dual Trigger Grips is a dual handgrip system that relocates the Sony FS7 II camera grip… -
Zacuto FS7 Dual Trigger Grips
The Sony FS7 Dual Trigger Grips is a dual handgrip system that relocates the Sony FS7 camera grip to a… -
Zacuto Eye 2 Pin Lemo to 4-pin Hirose Cable
This 30” cable is a 2 pin lemo (Male) to 4- pin Hirose (male). It allows you to power the… -
Zacuto EVF Rotator
The EVF Rotator works with our VCT Rotator to switch your Kameleon EVF Pro on your rig from horizontal to… -
Zacuto EVA1 Trigger Grip
The EVA1 Trigger Grip is a single handgrip that relocates the Panasonic EVA1 camera grip to a comfortable hand grip… -
Zacuto EVA1 Relocator
The Panasonic EVA1 handgrip Relocator moves the Panasonic EVA1 camera grip to a comfortable position for shoulder rigs. Slide this… -
Zacuto EVA1 Dual Trigger Grips
The EVA1 Dual Trigger Grips is a dual handgrip system that relocates the Panasonic EVA1 camera grip to a comfortable… -
Zacuto Dual Trigger Grip Base
The Dual Trigger Grip Base is the first thing you need to build your dual grips. It acts as a… -
Zacuto Director’s Grip for Mobile Phones
Increase the stability and versatility of your smartphone rig by adding a Director’s Grip. This solid wood handgrip can support… -
Zacuto Canon Y Cable
The Canon Y Cable for the Canon 18-80 and the Canon CN-E 70-200mm T4.4 Compact-Servo Cine Zoom lenses splits to… -
Zacuto Canon C70 Coldshoe Z-Finder
The Canon C70 Coldshoe Z-Finder allows you to attach the Z-Finder, optical viewfinder, to the Canon LCD screen when collapsed… -
Zacuto Canon C70 Cage
The Zacuto C70 Cage is our “no-cage” cage - lightweight and compact, and ready to accommodate any shooting style! It… -
Zacuto Canon C70 ACT Recoil with Kameleon Pro
The Canon C70 ACT Recoil Rig is an Arca-Swiss compatible shoulder rig with a lightweight camera specific cage for the… -
Zacuto Canon C500 Mark II & C300 Mark III Top Plate
This Top Plate works on the Canon C500 Mark II and C300 Mark III. It has a built in Z-Rail… -
Zacuto Canon C300 Mark III and C500 Mark II Recoil Pro
The Canon Recoil Pro is a shoulder rig designed specifically for the Canon C500 Mark II and the Canon C300… -
Zacuto Canon C300 Mark III & C500 MII Z-Finder Recoil Pro
The Canon Z-Finder Recoil Pro V2 is a shoulder rig designed specifically for the Canon C300 Mark III and Canon… -
Zacuto Canon C300 Mark II Helmet
The Canon C300 Mark II Helmet is a mini cage designed to mount directly to the top of the Canon… -
Zacuto Canon C200 Top Plate
The C200 Top Plate has a built in Z-Rail perfect for adding the Tactical Handle. Or if desired, you can… -
Zacuto Canon C200 Recoil Pro V2
The Canon C200 Recoil Pro V2 is a shoulder rig designed specifically for the Canon C200. This is a Next… -
Zacuto Canon C200 EVF Recoil Pro V2
The Canon C200 EVF Recoil Pro V2 is a shoulder rig designed specifically for the Canon C200. This is a… -
Zacuto Canon 18-80 Lens Support
This Lens Support is a foldable lightweight support that works with any height adjustable 15mm rod. This Lens Support screws… -
Zacuto Cage Kit for RED KOMODO
The cage for RED KOMODO is a very modular design. You can use each part individually or in any combination.… -
Zacuto Cage for RED KOMODO
The cage for the RED KOMODO is a very modular design. You can use each part individually or in any… -
Zacuto Brow for Mobile Phones
The Brow for your mobile phone keeps unwanted light and glare off your smartphone lens. The Brow is designed to… -
Zacuto Bridge- Mobile Phone Mount
The backbone of the Smart Z-Finder, the Bridge provides a mounting base for your phone. The adjustable clamp will stretch… -
Zacuto Blackmagic 4K and 6K Pocket Camera Basic Cage
The Blackmagic 4K and 6K Pocket (BMPCC) Camera Cage is our “no-cage” cage. It is lightweight and compact, and packs… -
Zacuto Axis Rod Mount
The Axis Rod Mount is designed to mount an Axis Mini or Axis Micro to the front rods on our… -
Zacuto Axis Micro DEMO
The Axis Micro EVF Mount is a simple and efficient way to add a wider range of adjustment to rosette… -
Zacuto Axis EVF Mount
The Axis Mini ENG style mount provides exceptional adjustability, ease of use, and compatibility. Empowering you to focus on capturing… -
Zacuto Auto Closing Eyecup
The Auto Closing Eyecup includes one rubber eyecup with an automatically closing flap. Great for preventing sun burns to your… -
Zacuto Arca Tripod Plate
The ACT Tripod Plate is the perfect accessory for your Smart Z-Finder. Install the mounting plate with 1/4"-20 screw to… -
Zacuto ACT Z CAM Recoil Rig
The ACT Z CAM Recoil Rig is an Arca-Swiss compatible shoulder rig with a lightweight camera cage. Designed specifically for… -
Zacuto ACT Universal Cage Recoil Rig
The ACT Universal Cage Recoil Rig is a universal arca-swiss compatible shoulder rig for mirrorless and DSLRs cameras. An ACT… -
Zacuto ACT Sony A7S III Recoil Rig
The ACT Sony A7S III Recoil Rig is an Arca-Swiss compatible shoulder rig with a lightweight camera cage. Designed specifically… -
Zacuto ACT Sony A7RIV Recoil Rig
The ACT Sony A7RIV Recoil Rig is an Arca-Swiss compatible shoulder rig with a lightweight camera cage. Designed specifically for… -
Zacuto ACT Recoil for RED KOMODO
The ACT Recoil Rig is an Arca-Swiss compatible shoulder rig with a lightweight camera cage. Designed specifically for the RED… -
Zacuto ACT Panasonic S5 Recoil Rig
The ACT Panasonic S5 Recoil Rig is an Arca-Swiss compatible shoulder rig with a lightweight camera cage. Designed specifically for… -
Zacuto ACT Mounting Plate
The ACT Camera Mounting Plate receives the ACT Camera Plate, ACT Baseplate or any Arca-Swiss compatible camera plate. Install the… -
Zacuto ACT Fuji X-T3 Recoil Rig
The ACT Fuji X-T3 Recoil Rig is an Arca-Swiss compatible shoulder rig with a lightweight camera cage. Designed specifically for… -
Zacuto ACT Camera Plate
The ACT Camera Plate is a quick release camera plate featuring an Arca-Swiss compatible design. It attaches to your camera… -
Zacuto ACT Blackmagic Pocket Recoil Rig
The ACT Blackmagic Pocket Recoil Rig is an Arca-Swiss compatible shoulder rig with a lightweight camera cage. Designed specifically for… -
Zacuto ACT Basic Recoil Rig
The ACT Basic Recoil Rig is an Arca-Swiss compatible shoulder rig without a camera cage & EVF. This rig is… -
Zacuto ACT Baseplate
The ACT camera Baseplate is an Arca-Swiss compatible baseplate. It is designed to work with all Mirrorless and DSLR cameras.… -
Zacuto Accessory Rail for Smart Z-Finder
The Accessory rail mounts to the Smart Z-Finder Bridge. It locks into a cold shoe preventing it from twisting, and… -
Zacuto 8″ Black Female/Female Rod Set
Pair of black 8" female rod extensions; 2 rods included. Female on both ends. These rods are lightweight; 15mm diameter… -
Zacuto 7″ Black Male/Female Rod Set
Pair of black 7" male rod extensions; 2 rods included. Male on one end, female on the other. These rods… -
Zacuto 60mm Z-Drive Gear
This is a larger gear for the Z-Drive. It attaches to Z-Drives via three included screws. This allows the Z-Drive… -
Zacuto 6.5″ Black Female/Female Rod Set
Pair of two black 6.5" female rods. Female on both ends. 2 Rods. These rods are lightweight; 15mm diameter and… -
Zacuto 5″ Z-Rail
A 5" Z-rail compatible with all NATO, SWAT, RED, PICATINNY and WOODEN CAMERA rails. It attaches via (2) ¼” 20… -
Zacuto 4.5″ Black Male/Female Rod
4.5" black male/female rod extension. Male on one end, female on the other. 1 rod only. These rods are lightweight;… -
Zacuto 4.5″ Black Female/Female Rod
4.5" black female/female rod. Female on both ends. 1 rod only. These rods are lightweight; 15mm diameter and black anodizing.… -
Zacuto 4 Pin Lemo Compatible Power and HDMI Video Cable with Power Switch OVERSTOCK
Zacuto has created a custom power video cable combining an HDMI cable with a 4 pin compatible to d-tap power… -
Zacuto 3/8 16 Replacement screw for VCT Baseplate
Replacement 3/8 16 screw for the VCT Universal Baseplate (discontinued) and VCT Pro Baseplate. This screw is also used in… -
3.5mm AUX cable for the Sony FX6 camera grip
3.5mm AUX cable for the Sony FX6 camera grip. Cable is also included with the purchase of Sony Trigger Grips. -
Zacuto 3.5″ Black Male/Female Rod
3.5" black male/female rod extensions. Female on one end and male on the other. 1 rod extension only. These rods… -
Zacuto 3″ Z-Rail
The Zacuto 3 inch Z-Rail works with any of our Z-Rail accessories. It attaches via (2) ¼” 20 screws (included)… -
Zacuto 3″ Black Female/Female Rod
3" black female/female rod extension. Female on both ends. 1 rod extension only. These rods are lightweight; 15mm diameter and… -
Zacuto 24″ 2 pin to 4 pin LEMO & SDI cable
A custom 24" 2 pin to 4 pin LEMO & SDI cable for use with Kameleon EVF PRO and RED… -
Zacuto 2″ Black Male/Female Rod
2" black male/female rod extension. Female on one end and male on the other. 1 rod extension only. These rods… -
Zacuto 2″ Black Female/Female Rod
2" black female/female rod extension. Female on both ends. 1 rod extension only. These rods are lightweight; 15mm diameter and… -
Zacuto 18-80 Lens Support & Right Angle Cable
The Right Angle Extension Cable allows you to extend the relocator cable of the Canon 18-80 or 70-200 lens grip… -
Zacuto 15mm Z-lock
The Z-Lock 15mm is designed to attach rods at the top of cages for wireless follow focus motors. -
Zacuto 12″ Black Female/Female Rod Set
Pair of black 12" female rod extensions; 2 rods included. Female on both ends. These rods are lightweight; 15mm diameter… -
Zacuto 12″ 2 pin to 4 pin LEMO & SDI cable
A custom 12" 2 pin to 4 pin LEMO & SDI cable for the Kameleon EVF PRO and RED RAPTOR… -
Zacuto 10″ Black Male/Female Rod Set
Pair of black 10" male rod extensions; 2 rods included. Male on one end, female on the other. These rods… -
Zacuto 1/4 20 Screw (Gorilla Plate V2)
Replacement 1/4 20 screw for the Zacuto Gorilla Plate V2. This version has a red lever at the front of… -
Zacuto 1/4 20 Replacement Screw
Replacement ¼” 20 screw for many Zacuto products including the following items: VCT Universal Baseplate (discontinued) ACT Baseplate VCT Pro… -
Zacuto 1/4 20 or 3/8 16 Lens Support
This camera lens support screws directly into the ¼ 20 screw hole that can be found under many different lenses… -
Zacuto 1/4 20 DSLR Screw
Replacement 1/4 20" screw for the following items: Zacuto Cages DSLR Baseplate -
Zacuto 1/2″ Adapter
The Half Inch Adapter is the all in one adapter. It can screw into any Zacuto female rod. It adapts… -
Zacuto 1″ Black Male/Female Rod
1" black male/female rod is lightweight; 15mm diameter and black anodizing. -
Zacuto 1″ Black Female/No Tap Rod
1" black female rod extension with female thread on one end, no thread on the other. 1 rod extension only.… -
NB Stabilizer Slider
Track length: 2M Weight capacity: 200Kg / 440Lb Heavy duty structure Hard anodize, teflon sealed Carriage comes with 80mm through clamp… -
NB Stabilizer ToughGrip camera handle
The ToughGrip handle 3/8"-16 camera screw One solid piece aircraft aluminum grade.CNC machined air craft grade aluminum camera handle.3 X… -
NB Stabilizer Bridge Plate
Arri standard Light weight Bridge plate Can be clamped to the dovetail plate from the rear / front / side.… -
NB Stabilizer Dovetail Plate
280mm Arri standard light weight Dovetail Hard anodized aluminum with Teflon sealing for minimum friction between the dovetail & bridge plate. -
NB Stabilizer Bridge Plate & Dovetailpack
280mm Arri standard light weight Dovetail Arri standard Light weight bridge plate Hard anodized aluminum with Teflon sealing for minimum friction… -
NB Stabilizer Focus Plate
Follow focus station cheese plate base. One plate allows the focus puller to attach all of his accessories in a stiff way.… -
-
NB Stabilizer Bridge plate & Dovetail & 15mm Rod clamp pack
280mm Arri standard light weight Dovetail Arri standard Light weight bridge plate Hard anodized aluminum with Teflon sealing for minimum friction… -
NB Stabilizer Rock-a-bye Baby Accessories Kit for small cameras
Complementary kit for the Rock-a-bye Baby - monitor horizon keeper, for samll cameras up to 2Kg -
NB Stabilizer 19mm Rod clamp with Arri standard pin lock
3/8"-16 screw and a nylon washer Anodized aluminum -
NB Stabilizer Quadro Cheese Plate
22 X 3/8 – 16 threads (9 of them with Arri standard pin lock holes) 20 X ¼ - 20… -
NB Stabilizer Multi purpose 15mm Clamp (60mm center to center)
15mm Clamp 60mm center to center. 3 x 3/8 Threads (one of them - ARRI standard). 2 x 1/4 -… -
NB Stabilizer 15mm Aluminum Rods
Pair of 15mm (120mm Length) Aluminum Rods with M6 bolts and washers to attach to the Rock-a-bye -
NB Stabilizer Bridge Plate Lips
Pair of Bridge Plate lips to attach to the Rock-a-bye base plate to make it an Arri Standard bridge plate -
NB Stabilizer Arri 35 Bottom Plate
Hard anodized aluminum & Teflon sealing Bottom plate 3/8"-16 Thread 1/4" Threads M5 Threads on the edges 3/8" Slots -
NB Stabilizer Top Cheese Plate
Hard anodized aluminum & Teflon sealing Top cheese plate 3/8"-16 Threads with Arri standard locating holes 1/4" Threads M4 Threads for… -
NB Stabilizer Easy Rock
Hand held / Easy rig Cage for the Rock-a-bye. Can be used for director's monitor, Focus puller stand and more.… -
NB Stabilizer Accessories Pouches
4 detachable pouches for cables & accessories Sits on the Docking bracket High quality cordura fabric & YKK Zippers -
NB Stabilizer Vest
Simple, tough and lightweight structure •Aluminum and POM skeleton •Hard anodized Teflon sealed •Minimum components •New designed strong & light… -
NB Stabilizer Hot Swap Battery Plate
CNC Aluminum machined Junction Box Hard anodizes coating Input: 2B 2Pin Lemo Hot swap X 1 V-lock battery plate X… -
NB Stabilizer Docking Bracket
One piece simple structure Hard anodized Teflon sealed POM The stud has male and female attaching options (fits C stand… -
NB Stabilizer Sled
Minimum components Hard anodized Teflon sealed Simple, tough and lightweight structure Super modular - easy to change, assemble and disassemble… -
NB Stabilizer Arm post Extension
The NB's arm post extensions are sitting on an existing arm post. Just slide them in, and fly. -
NB Stabilizer Arm
Arm post The Arm post is rotating on bearings with friction control, to adjust from completely locked to fully released. -
Motocrane Revolt Flight Case
Revolt Flight Case Only- does not include any of the Revolt ecosystem! This is a SKB 3i 1610-10 waterproof case… -
Motocrane Revolt 12V Battery to Dual 4-pin XLR (for use with DC-3)
Used for connecting the DC-3 Power Converter to automotive 12V batteries for providing high-discharge (500W) 3-pin XLR to the Revolt… -
Motocrane Revolt High Capacity 3-pin XLR Power Cable
Recommended for high-discharge applications where the gimbals additional power draw may cause too much voltage drop when used with smaller… -
Motocrane Revolt DC-3 Power Converter
The DC-3 converts common DC voltages such 12V, 36V and 48V to compatible 3-pin XLR. Highly valuable for automotive applications,… -
Motocrane Revolt AC-3 Power Converter
The AC-3 converts 100-240V AC wall/house/shore power (Alternating Current) to high-discharge 3-pin XLR for applications where outlets are readily available.… -
-
-
-
Motocrane INS Cable
45" Cable that connects the ULTRA Turret to the INS Sensor (requires INS Advanced Stabilization Upgrade) -
Motocrane 10ft COM Cable
10' COM Cable that connects the Extended Controller, Compact Controller or COMMAND Consoles to the PSU (Power Supply Unit) -
MotoCrane ULTRA DSK
The Deadlock Service kit includes all field-serviceable components, tools and instructions for MotoCrane ULTRA, so when sh*t happens, you’re up… -
Motocrane ULTRA Programming Kit
Required for updating Firmware on MotoCrane ULTRA for compatibility with COMMAND Console PRO. Learn more at: https://motocrane.com/ultra-programming-kit -
Motocrane DVM (Driver View Monitor)
Camera car drivers are instrumental to safe and effective shot execution on a dynamic film set. The Driver View Monitor… -
Motocrane ULTRA XP 5-Piece Flight Case Set
Includes all ULTRA XP Cases: - Front Booms Case - Rear Boom Case - Isolator Case - Turret Case -… -
MotoCrane ULTRA Heavylift
Increases the payload capacity of ULTRA from 55lbs to 65lbs by updating the Isolator with heavy duty parts and adding… -
MotoCrane ULTRA INS Advanced Stabilization
Includes INS Sensor + IP65 Cable, 1kW Brushless motor, Rev.2 Fulcrum Cover, INS Firmware files and installation cost. ULTRA Turret… -
Motocrane 6′ HYPER MAIN PWR Extension (Straight)
6ft HYPER Main PWR Extension, to be used in-line with existing Cable Set for increasing overall length. -
Motocrane 6′ HYPER MAIN PWR Extension (Right-angle)
6ft HYPER Main PWR Extension, terminated in a Right-Angle on one side for low-profile connection underneath the HYPER Turret. To… -
Motocrane HYPER ACC PWR to D-Tap
Allows for passing 2x D-Tap power sources through the ACC PWR ports on MotoCrane HYPER -
Motocrane HYPER ACC PWR Flying Leads
Allows for making your own cables to be used with HYPER ACC PWR -
Motocrane 6′ HYPER ACC PWR Extension
6ft Extension that re-locates the ACC PWR port from the HYPER Turret further down the boom, allowing shorter ACC PWR… -
Motocrane 18′ HYPER ACC PWR Extension
18ft Extension that re-locates the ACC PWR port from the HYPER Turret further down the boom, allowing shorter ACC PWR… -
Motocrane HYPER ACC PWR to Shotover G1 Freerunner
Allows the Shotover G1 Ground Station to pass power to the Freerunner via HYPER PowerLink and Turret ACC PWR ports.… -
Motocrane HYPER ACC PWR to Shotover G1 Ground Station
Allows the Shotover G1 Ground Station to pass power to the Freerunner via HYPER PowerLink and Turret ACC PWR ports.… -
Motocrane HYPER ACC PWR to XT90 (Female)
Allows 2x XT90 power sources, such as a MoVI XL Battery, to be passed through the HYPER slipring via the… -
Motocrane HYPER ACC PWR to XT90 (Male)
Allows 2x XT90 power sources, such as a MoVI XL Battery, to be passed through the HYPER slipring via the… -
Motocrane HYPER ACC PWR to XLR (Female)
Allows 3 and 4-pin XLR power sources, such as a CineVCLX, to be passed through the HYPER slipring via the… -
Motocrane HYPER ACC PWR to XLR (Male)
Allows 3 and 4-pin XLR power sources, such as a CineVCLX, to be passed through the HYPER slipring via the… -
Motocrane 48V SB50 Splitter Cable
Used for splitting the output of a single 48V power source (MotoBatt) for providing 48V System Power to RADICAL/ULTRA and… -
Motocrane ACC PWR to Shotover G1 Freerunner
Connects 48V power output from ACC PWR port on MotoCrane RADICAL/ULTRA Base pedestal to Shotover G1 Freerunner. *Freerunner side only-… -
Motocrane ACC PWR to Shotover G1 Ground Station
Connects 48V power output from Shotover G1 Ground Station to the ACC PWR port on MotoCrane RADICAL and ULTRA Power… -
Motocrane 6′ RADICAL Main PWR Extension
6ft Extension used to increase the overall length of the RADICAL MAIN PWR Cable that connects the PSU to the… -
Motocrane 10ft COM Cable
10' COM Cable that connects the Extended Controller, Compact Controller or COMMAND Consoles to the PSU (Power Supply Unit) -
-
Motocrane SB50 Flying Leads Cable
Anderson SB50 Gray Flying Leads used for creating your own 48V power source to be used with the MotoCrane ULTRA/RADICAL… -
Motocrane 15ft ACC PWR Extension
15ft Extension that re-locates the ACC PWR port from the Base Pedestal further down the boom, allowing shorter ACC PWR… -
Motocrane XT90 Ext. Relocator Cables
15ft Extension that can be passed through the MoVI XL pan motor to relocate batteries away from the head (such… -
Motocrane 10ft COM Extension
10ft COM Extension is used with existing 10ft COM Cable, extending total COM Cable length to 20ft. This allows the… -
Motocrane RADICAL Fulcrum Cable
1.5ft MAIN PWR Cable that connects the RADICAL Base to the RADICAL Fulcrum -
Motocrane Main Cable
12ft MAIN PWR Cable that connects the RADICAL PSU in the interior of the vehicle to the RADICAL Base located… -
Motocrane RADICAL INS2 Cable
6.5ft Cable that connects the RADICAL INS2 Sensor module located on the Front Boom to the 'SERIAL' port on the… -
Motocrane ACC COM to Shotover G1 Ground Station
Allows Shotover G1 COMMS to be hardwired from the Ground Station to the Freerunner through the MotoCrane slipring via the… -
Motocrane ACC COM to Shotover G1 Freerunner
Allows Shotover G1 COMMS to be hardwired from the Shotover Groundstation to the Freerunner through the MotoCrane slipring via the… -
Motocrane 18′ ACC COM Extension
18ft Extension that re-locates the ACC COM port on the Base Pedestal (or HYPER Turret) further down the boom, allowing… -
Motocrane 5ft COM Extension
5ft COM Extension is used with existing 10ft COM Cable, extending total COM Cable length to 15ft. This allows the… -
Motocrane ACC COM Flying Leads
Breakout cable for ACC COM that allows for DIY termination and cable making. -
Motocrane DVM Auxilliary Adapter
Allows the DVM (Driver View Monitor) to be used with RADICAL and HYPER -
Motocrane ACC PWR to XLR (3-pin, Male)
Allows a 3-pin XLR (28.8V) power source, such as from a CineVCLX, to be passed through the ULTRA/RADICAL slipring via… -
Motocrane ACC PWR to XLR (3-pin, Female)
Allows a 3-pin XLR (28.8V) power source, such as from a CineVCLX, to be passed through the ULTRA/RADICAL slipring via… -
Motocrane ACC PWR to XLR (4-pin, Male)
Allows a 4-pin XLR (14.4V) power source, such as from a CineVCLX, to be passed through the ULTRA/RADICAL slipring via… -
Motocrane ACC PWR to XLR (4-pin, Female)
Allows a 4-pin XLR (14.4V) power source, such as from a CineVCLX, to be passed through the ULTRA/RADICAL slipring via… -
Motocrane ACC PWR to XT90 (Male)
Allows an XT90 power source, such as a MoVI XL Battery, to be passed through the ULTRA/RADICAL slipring via the… -
Motocrane ACC PWR to XT90 (Female)
Allows an XT90 power source, such as a MoVI XL Battery, to be passed through the ULTRA/RADICAL slipring via the… -
Motocrane ACC PWR to D-Tap
Allows for passing 1x D-Tap power source through the ACC PWR ports on MotoCrane RADICAL and ULTRA. -
Motocrane 6′ ACC COM Extension
6ft Extension that re-locates the ACC COM port on the Base Pedestal (or HYPER Turret) further down the boom, allowing… -
Motocrane RADICAL 5-Piece Cable Set
A complete, redundant set of cables for MotoCrane RADICAL. Includes: -10ft COM Cable -10ft MAIN Power Input -12ft MAIN PSU… -
Motocrane 12VA (12 to 48 Voltage Adapter)
*REQUIRES UPC. An extension for the UPC that allows MotoCrane RADICAL or ULTRA to be powered from the vehicle's own… -
Motocrane MotoBatt
This 48V 18Ah LiFePO4 battery is the most common plug-and-play method for providing 48V to the MotoCrane RADICAL and ULTRA… -
Motocrane RADICAL SRB
Allows for use of the RADICAL Isolator as a standalone suspension arm (like a Black Arm) when rigged to industry… -
Motocrane Flowcine Tranquilizer
High Frequency Anti-vibration mount (AVM) from Flowcine. Comes standard with full sets of Shore 30 and Shore 40 O-rings, and… -
Motocrane QR (Quick Release) Eliminator for MoVI XL
Eliminates the Freefly MoVI XL Quick Release and Mitchell Mount, saving >6lbs of weight. Connects the MoVI XL directly to… -
Motocrane RADICAL L/S Kit Flight Case
SKB 3i-2922-10 Flight Case with custom foam inserts for carrying the L/S Kit, collapsible handle and roller wheels. … -
Motocrane RADICAL L/S Kit
Allows for configuration of MotoCrane RADICAL in "Long" 14ft mode with 35lbs of rated payload, or "Short" 9ft mode with… -
-
Motocrane UPC (Ultracapacitor Power Core)
Allows MotoCrane ULTRA or RADICAL to be powered using 4x V-Mount batteries. Can be paired with the 12VA Accessory to… -
Motocrane RADICAL 6-Piece Flight Case Set
Includes the complete set of Flight Cases for MotoCrane RADICAL: Front/Middle Boom Case Rear Boom/Fairing Boom Case (fits HEAVYLIFT Components)… -
Motocrane RADICAL Heavylift
Increase payload capacity of MotoCrane RADICAL +29% to 45lbs/20kg total with HEAVYLIFT. Includes the complete set of braces, mounts, and… -
Motocrane RADICAL INS2 Advanced Stabilization
Includes INS Sensor Module + Cable for plug and play operation of active gyro stabilization on the MotoCrane RADICAL Lift… -
Motocrane COMMAND Console LITE
100% developed in-house for precise arm control and intuitive user experience- the COMMAND Console is packed with features that help… -
Motocrane COMMAND Console PRO
100% developed in-house for precise arm control and intuitive user experience- the COMMAND Console is packed with features that help… -
Freefly Systems Wheel to MIMIC Cable
Durable overmolded cable, used to connect MIMIC to Mōvi Wheels. Connector A: 6 pin Molex Microfit Connector B: Locking GH connector 300mm (11.81")… -
Freefly Systems Rosette Mount
90 degree rosette mount for Iris/Zoom Module (same as the one that ships with the Iris/Zoom Module or complete Pilot… -
Freefly Systems Mōvi Controller to Wheel Cable
Durable over-molded cable, used to connect Mōvi Wheels to Mōvi Controller (this is a replacement or spare for the one… -
Freefly Systems Quick Release 25mm post
Bobbins are used to mount the wheels and Mōvi Controller to the included cheeseplate, tripods, or anywhere with a 1/4"… -
Freefly Systems CAN Cable (250mm)
Durable overmolded cable, used for chaining Mōvi Wheels. (250mm Length) -
Freefly Systems 25mm Tube to Rosette Adapter
Quickly mount your Pilot modules to any standard 25mm tube (MIMIC Handlebar, Classic Handlebar, Low Profile Handle, etc). Rosette is… -
Freefly Systems 30mm Tube to Rosette Adapter
Quickly mount your Pilot modules to the MoVI Ring Pro (30mm tube). Rosette is perpendicular to tube on this mount. -
Freefly Systems Offset 25mm Tube to Rosette Adapter
Quickly mount your Pilot modules to any standard 25mm tube (MIMIC Handlebar, Classic Handlebar, Low Profile Handle, etc). Rosette is… -
Freefly Systems Pilot Marking Ring
Pilot Focus Module rings can be swapped out as quickly as you can swap out lenses. Mark one ring for… -
Freefly Systems Offset 30mm Tube to Rosette Adapter
Quickly mount your Pilot modules to the Mōvi Ring Pro (30mm tube). Rosette is parallel to the tube on this… -
Freefly Systems Cutout Stainless Steel Wheel
Swap out the standard steel or brass wheels with these optional cutout stainless steel wheels that offer a stylized look… -
Freefly Systems Wave Replacement Battery
This is a replacement (or spare) internal battery for the Freefly Wave Camera. Changing the battery is not an on-set… -
Freefly Systems Wave Side Handle Mount (for SmallRig)
Use these strong and lightweight adapters to mount side handles on your Wave. Designed to be compatible with side handles… -
Freefly Systems Wave Charger and AC Power Supply
This AC power supply can charge the and/or allow continuous operation of the Wave camera. This is a replacement or… -
Freefly Systems Wave D-Tap Power Cable
Use this cable to power the Wave* from an external battery or power source through D-Tap. Excellent for using the… -
Freefly Systems Wave Handle Set
We designed these handles for a compact handheld Wave setup. We picked wood for the grips because it feels great… -
Freefly Systems Wave Handheld Bundle
We designed Wave to be the most efficient high-speed camera available. It’s small, light, and insanely fast. It has unique capabilities allowing… -
Freefly Systems Mōvi Pro Wave / Ember Remote Control Cable
Connect your Wave or Ember S5K camera to the Mōvi Pro and trigger start/stop record from any supported Freefly ecosystem… -
Freefly Systems KipperTie Adapta FE/PL
Adapta FE/PL is the high quality PL lens mount specifically designed for Freefly Ember. Converting from Ember’s robust 4 bolt… -
Freefly Mōvi Carbon
World’s first handheld and drone mountable 5-axis camera stabilizer, now in more flavors. -
Freefly Mōvi XL Optical Gyro Edition with Case
The Mōvi XL Optical Gyro Edition with Case includes the Mōvi XL, Travel Case and the Mōvi XL Optical Gyro… -
Freefly Mōvi XL Optical Gyro Edition
The Mōvi XL Optical Gyro Edition includes the Mōvi XL and the Mōvi XL Optical Gyro upgrade. It's designed to… -
Freefly Mōvi XL with Case
The Freefly Systems Mōvi XL with Case is a lightweight, portable system that allows users to capture stable imagery in… -
Freefly Mōvi Pro / XL LANC Serial Cable – Long
This cable allows users to access their camera's LANC commands. This allows users to start and stop camera recording as… -
Freefly Mōvi Controller + FRX Pro (900 MHz)
The Mōvi Controller is a professional grade remote system that allows the operator full control over pan, tilt, and roll,… -
Freefly Mōvi Pro Essentials Bundle + Travel Case (SL4)
This is the most advanced camera movement system ever created. It offers industry leading performance, flexibility, and ease of use.… -
Freefly 15mm T-Clamp (pair)
This pair of 15mm T-clamps* can be used to expand the functionality and utility of your Cargo Landing Gear or… -
Freefly Hex Driver – 1.5MM
Keep your Mōvi or Alta properly tuned with our ergonomic, high-torque hex drivers. -
Freefly USB C to USB A 2.0 Cable (1 m)
This cable allows users to charge their MIMIC controller's internal battery via the USB C port. It can plug into… -
Freefly USB C to USB C 2.0 Cable (1 m)
This cable allows users to charge their Movi faster than is possible with traditional USB-A cable. -
Freefly COM to COM Cable (200mm)
Using a common connector in the Freefly gimbal ecosystem, this cable connects the Pilot Modules to the MIMIC for communication… -
Freefly COM to COM Cable (300mm)
Using a common connector in the Freefly gimbal ecosystem, this cable connects the Pilot Modules to the MIMIC for communication… -
Freefly COM to COM Cable (500mm)
Using a common connector in the Freefly gimbal ecosystem, this cable connects the Pilot Modules to the MIMIC for communication… -
Freefly Toad M3 (Male Adapter)
Adding a Toad (male adapter) and a Ninja Star in your kit allows for quick mounting of the Mōvi to… -
Freefly Mōvi Pro / XL RED RCP Serial Cable – Long
This cable allows users to gain access to RED’s Redlink Command Protocol when connected to the ‘CTRL’ port on RED… -
Freefly Lightweight Standard to Standard Video Cable (1.5m)
This super-flexible video cable was designed to connect a device with a standard/full connector (A)) to a device with a… -
Freefly Lightweight Right Angle Micro to Standard Video Cable (3m)
This super-flexible video cable was designed to connect a device with a micro connector (D) to a device with a… -
Freefly Lightweight Standard to Standard Video Cable (3m)
This super-flexible video cable was designed to connect a device with a standard/full connector (A) to a device with a… -
Freefly Lightweight Mini to Standard Video Cable (1.5m)
This super-flexible video cable was designed to connect a device with a mini connector (C) to a device with a… -
Freefly Lightweight Right Angle Micro to Mini Video Cable (1.5m)
This super-flexible video cable was designed to connect a device with a mini connector (C) to a device with a… -
Freefly Mōvi Pro / XL Phantom Start/Stop Cable – Long
This cable allows users to access the Vision Research Start / Stop command protocol. This allows users to start and… -
Freefly D-Tap Cable for FRX Pro
Replacement D-tap cable to provide power for the FRX Pro installed on a Mōvi Controller. Each FRX Pro pair for… -
Freefly Ball-End Hex Driver – 3/16
Replacement 3/16 Ball-End Hex Driver that is included with MoVI Wheels. Features Handle Material - Thermoplastic; Soft Rubber Coating… -
Freefly 13mm to 15mm Double Clamp Mount
If you need to offset your 13mm mount, and adapt to a 15mm accessory, use this mount, with adjustable levers… -
Freefly Ball-End Hex Driver – 5/32
Replacement 5/32 Ball-End Hex Driver that is included with Mōvi Wheels. Features Handle Material - Thermoplastic; Soft Rubber Coating Overall… -
Freefly 13mm Double Clamp Mount
If you need to offset your 13mm mount, use this 13mm Double Clamp Mount with adjustable levers on each end.… -
Freefly 13mm Low Profile Mount
Similar to our standard 13mm Quick Release Plug, but much lower profile! Great for mounting monitors, transmitters, receivers and other ¼… -
Freefly USB A to USB A 2.0 Cable (1 m)
USB 2.0 cable used to connect your Mōvi Controller to your USB A equipped computer for firmware updates. -
Freefly 13mm Male to Female Right Angle Mount
Sometimes you need to turn your mount 90° for balance or convenience when building and balancing your Mōvi. Use this… -
Freefly Adjustable Monitor Mount Quick Release 30mm
The Adjustable Monitor Mount Quick Release installs quickly on your 30mm tube and uses the 13mm plugs to mount monitors,… -
Freefly 13mm Right Angle Mount
Sometimes you need to turn your mount 90° for balance or convenience when building and balancing your Mōvi. Use this… -
Freefly 13mm to 13mm Mount
Need to a male to male 13mm spud adapter? Here it is! Features Compatible with all Freefly 13mm accessories mounts… -
Freefly 13mm Jog Mount
Need a little bit of extra room, a bit of extra clearance or an additional option for rotation with your… -
Freefly Hex Driver – 2.0MM
Keep your Mōvi or Alta properly tuned with our ergonomic, high-torque hex drivers. -
Freefly MIMIC / Mōvi Controller Antenna
Direct replacement antenna for Freefly 2.4Ghz systems. MIMIC MIMIC Beta Mōvi Controller Mōvi Controller Receiver (RP-SMA Version) Features: RP-SMA connection… -
Freefly Hex Driver – 2.5MM
Keep your Mōvi or Alta properly tuned with our ergonomic, high-torque hex drivers. -
Freefly Mōvi Camera Mounting Screws
Replacement for the Freefly standard camera mounting screws included with the Mōvi (M5/M10/M15/Mōvi Pro). These screws fit the Mōvi bottom… -
Freefly USB C to USB Micro B 2.0 Cable (500 mm)
This cable allows users to power any item that uses a USB Micro B connector from the Mōvi Pro camera… -
Freefly DTAP to Connex Transmitter Power Cable
This Cable allows users to power their Connex wireless system from one of the accessory ports on the Mōvi Pro.… -
Freefly Lightweight Right Angle Micro to Standard Video Cable (0.7m)
The super-flexible Lightweight Right Angle Micro to Standard Cable is designed to send picture from camera to a monitor or… -
Freefly Mōvi Hot Shoe Mount
Ultra lightweight hot shoe mount for the Mōvi Adjustable Top Camera Plate. -
Freefly Replacement Landing Gear Leg (single 15 x 450mm)
A spare or replacement carbon fiber landing gear leg compatible with Mōvi Pro Landing Gear, Aero Landing Gear or Cargo… -
Freefly Mōvi Ring Pro Replacement Feet
This is a kit of replacement feet for the Mōvi Ring Pro and Mōvi Ring Pro II in case you… -
Freefly Large Counterweight Set
These are the large weights that come included with the Mōvi Pro Junk in the Trunk and are not compatible… -
Freefly Small Counterweight Set
These are the small weights that come included with the Mōvi Pro Junk in the Trunk and not compatible with Movi… -
Freefly Pop-N-Lock Refresh Kit
Add an extra quick release plate to your Pop-N-Lock kit, and beefs up the receiving plate to handle heavier accessories… -
Freefly Wired Control Kit (without FRX Receiver)
If you are operating your Mōvi (M5, M10, M15, Mōvi Pro, Mōvi XL or Mōvi XL) and Mōvi Controller in… -
Freefly Junk in the Trunk
We all know that lighter is better, but when the shot needs a bigger lens (or extra lens motors, matte… -
Freefly Bush Pilot
Bush Pilot is a compact knob that quick releases to the MIMIC. It gives users the ability to control Focus,… -
FREEFLY Accessory Clamp (25mm)
Features Lightweight machined aluminum clamp (0.8oz/22.6g each) Compatible with any 25mm tube with un-captured end M3 threaded mount holes spaced… -
SmartSystem Vlock Plate for SM7-3K / SM7-3K-Z
Vlock plate addon kit for SmartSystem monitors: SM7-3K SM7-3K-Z -
SmartSystem SmartCAM Tempo
Ruggedized 12G SDI Splitter with two reclocked output OLED Display with INPUT signal information and Diagnostic SDI Eye pattern Polarity… -
SmartSystem 3Studs Plate for SM7-3K / SM7-3K-Z
3Studs plate addon kit for SmartSystem monitors: SM7-3K SM7-3K-Z -
SmartSystem AirCONTROL Software
Thanks to AirCONTROL, the dedicated app for DigiDRIVE Portable MK2 or for AirBRIDGE ( the WiFi addon for DigiDRIVE Portable) you can unleash all the… -
SmartSystem DigiMOTOR 3 mark-I
Designed for SMART3 DOLLY (PRO or Reflex) Obtain precise and smooth movements regardless of the camera weight. Ultra low noise… -
SmartSystem DigiMOTOR Reflex mark-II
Designed for SMARTSLIDER REFLEX S mk2. Obtain precise and smooth movements regardless of the camera weight. Lift in vertical up… -
SmartSystem DigiMOTOR PRO mark-I
Designed for SMARTSLIDER PRO. Obtain precise and smooth movements regardless of the camera weight. Lift in vertical up to 14… -
SmartSystem DigiDRIVE Portable mark-II
Compact, simple and easy-to-use… In one single word PORTABLE. With its small sizes ( 125 x 60 x 80 mm)… -
SmartSystem SmartSLIDER PRO Custom1300
SMARTSLIDER PRO joins an unprecedented smoothness to an extreme robustness. With SMARTSLIDER PRO it is possible to move every kind… -
SmartSystem SmartSLIDER PRO800
SMARTSLIDER PRO joins an unprecedented smoothness to an extreme robustness. With SMARTSLIDER PRO it is possible to move every kind… -
SmartSystem SmartSLIDER PRO680
SMARTSLIDER PRO joins an unprecedented smoothness to an extreme robustness. With SMARTSLIDER PRO it is possible to move every kind… -
SmartSLIDER Reflex S MK2-Reflex S800
SmartSLIDER Reflex S MK2 is the right slider for the professional video makers that need lite equipment without giving up… -
SmartSLIDER Reflex S MK2-Reflex S560
SmartSLIDER Reflex S MK2 is the right slider for the professional video makers that need lite equipment without giving up… -
SmartSystem SmartSLIDER PRO560
SMARTSLIDER PRO joins an unprecedented smoothness to an extreme robustness. With SMARTSLIDER PRO it is possible to move every kind… -
SmartSLIDER Reflex S MK2-Reflex S410
SmartSLIDER Reflex S MK2 is the right slider for the professional video makers that need lite equipment without giving up… -
SmartSystem SmartSLIDER Atom75
Unprecedented portability for a slider that never let you down. A pure DIY experience with the freedom of choosing what… -
SmartSLIDER Reflex S MK2-Reflex S200
SmartSLIDER Reflex S MK2 is the right slider for the professional video makers that need lite equipment without giving up… -
SmartSystem SmartSLIDER Atom60
Unprecedented portability for a slider that never let you down. A pure DIY experience with the freedom of choosing what… -
SmartSystem SmartSLIDER Atom35
Unprecedented portability for a slider that never let you down. A pure DIY experience with the freedom of choosing what… -
SmartSystem Matrix 4Pin DC Cable for Sony Venice 12V (60cm/24in)
DC power cable for Matrix sled compatible with SONY Venice Camera 12Volt version Cable length: 60cm / 24″ -
SmartSystem Matrix 4Pin DC Cable for Sony Venice 12V (40cm/15.7in)
DC power cable for Matrix sled compatible with SONY Venice Camera 12Volt version Cable length: 40cm / 15.7″ -
SmartSystem Matrix 4Pin DC Cable for Arri Alexa 35 / Mini / Amira 24V (60cm/24in)
DC Power cable for Matrix sleds compatible with ARRI Alexa 35 / Mini / AMIRA. 24 Volt version Cable length:… -
SmartSystem Matrix 4Pin DC Cable for Sony Venice 24V (60cm/24in)
DC power cable for Matrix sled compatible with SONY Venice Camera 24Volt version Cable length: 60cm / 24″ -
SmartSystem Matrix 4Pin DC Cable for Sony Venice 24V (40cm/15.7in)
DC power cable for Matrix sled compatible with SONY Venice Camera 24Volt version Cable length: 40cm / 15.7″ -
SmartSystem Matrix 4Pin DC Cable for Sony Venice 12V (60cm/24in)
DC power cable for Matrix sled compatible with SONY Venice Camera 12Volt version Cable length: 60cm / 24″ -
SmartSystem Matrix 4Pin DC Cable for Sony Venice 12V (40cm/15.7in)
DC power cable for Matrix sled compatible with SONY Venice Camera 12Volt version Cable length: 40cm / 15.7″ -
SmartSystem Matrix 4Pin DC Cable to DTAP Socket (30cm/12in)
DC power cable for Matrix sled to DTAP Socket. -
SmartSystem Matrix 4Pin DC Cable to DTAP Plug (30cm/12in)
DC power cable for Matrix sled to DTAP Plug. -
SmartSystem Matrix 2Pin DC Cable to DTAP Plug (50cm/20in)
DC Cable from Matrix 2Pin connector to DTAP Plug It can be used to power from DTAP Output the following… -
SmartSystem Matrix 2Pin DC Cable to DTAP Plug (30cm/12in)
DC Cable from Matrix 2Pin connector to DTAP Plug It can be used to power from DTAP Output the following… -
SmartSystem Matrix C-Battery Bridge Cable
DC power cable for Matrix sled to interconnect the C-Battery with the main sled AUX ports -
SmartSystem Matrix 4Pin to 2Pin DC Cable (50cm/20in)
DC Cable from Matrix 4Pin to 2Pin connector. This cable connects the AUX circuitry generated by Intelligent Battery plate (AUX… -
SmartSystem Matrix 2Pin DC Patch Cable 50cm/20in
Patch cable 2Pin – 2Pin. Compatible with: Monitor SM7-3K Monitor SM7-3K-Z SmartCAM Zen SmartCAM Horizon SmartCAM Horizon Lite Length… -
SmartSystem Ronin2 Battery to Alexa XT 24V (100cm/40in)
Cable designed to power from the native voltage of DJI® Ronin2® Battery module the ARRI® XT or old film camera… -
SmartSystem Matrix to Ronin2 Head Cable (30cm/12in)
DC power cable to interconnect Matrix sled MPX port to DJI® Ronin2® Gimbal head Cable length 30cm /12″ -
SmartSystem Matrix to Ronin2 Battery Cable (30cm/12in)
DC power cable to interconnect Matrix sled MPX port to DJI® Ronin2® Batteries Cable length 30cm /12″ -
SmartSystem Matrix 4Pin DC Cable for RED DSMC1 / DSMC2 12V (60cm/24in)
DC power cable for Matrix sled compatible with RED DSMC1 / DSMC2 cameras Cable length: 60cm / 24″ NOTE:… -
SmartSystem Matrix 4Pin DC Cable for RED Ranger 24V (60cm/24in)
DC power cable for Matrix sled compatible with RED Ranger Camera 24Volt version Cable length 60cm /24″ -
SmartSystem Matrix 4Pin DC Cable for RED Ranger 12V (60cm/24in)
DC power cable for Matrix sled compatible with RED Ranger Camera 12Volt version Cable length: 60cm / 24″ -
SmartSystem Matrix 4Pin DC Cable for Arri Alexa Mini / Amira 12V (60cm/24in)
DC Power cable for Matrix sleds compatible with ARRI Alexa Mini / AMIRA. 12 Volt version Cable length: 60cm /… -
SmartSystem Matrix 4Pin DC Cable for Arri Alexa Mini / Amira 12V (30cm/12in)
Key Features For ARRI ALEXA Mini/AMIRA Camera For Matrix Stabilizer Sled 12V Power Cable 24" Length -
SmartSystem Matrix 4Pin DC Cable for Arri Alexa 35 / Mini / Amira 24V (60cm/24in)
DC Power cable for Matrix sleds compatible with ARRI Alexa 35 / Mini / AMIRA. 24 Volt version Cable length:… -
SmartSystem Matrix 4Pin DC Cable for Arri Alexa 35 / Mini / Amira 24V (30cm/12in)
Key Features For ARRI ALEXA Mini/AMIRA Camera For Matrix Stabilizer Sled 24V Power Cable 24" Length In the Box… -
SmartSystem Matrix 4Pin DC Cable for ALEXA XT 24V (60cm/24in)
DC power cable for Matrix sled compatible with ALEXA XT Camera 24Volt version Cable length 60cm /24″ -
SmartSystem Matrix 4Pin DC Cable for Arri Alexa 35 / Mini / Amira 24V (30cm/12in)
Key Features For ARRI ALEXA Mini/AMIRA Camera For Matrix Stabilizer Sled 24V Power Cable 24" Length In the Box… -
SmartSystem Matrix 4Pin DC Cable for ALEXA XT 24V (40cm/16in)
DC power cable for Matrix sled compatible with ALEXA XT Camera 24Volt version Cable length 40cm /16″ -
SmartSystem Matrix 4Pin DC Cable for Arri Alexa Mini / Amira 12V (60cm/24in)
DC Power cable for Matrix sleds compatible with ARRI Alexa Mini / AMIRA. 12 Volt version Cable length: 60cm /… -
SmartSystem Matrix 4Pin DC Cable for Arri Alexa 35 / Mini / Amira 24V (60cm/24in)
DC Power cable for Matrix sleds compatible with ARRI Alexa 35 / Mini / AMIRA. 24 Volt version Cable length:… -
SmartSystem Matrix Sled to Volt® Bracket
SKU: 000009053 Bracket specifically designed to grant a stable and vibration-free connection between Volt® Brain and Matrix top stage -
SmartSystem Matrix Sled to Volt® Bracket
SKU: 000009053 Bracket specifically designed to grant a stable and vibration-free connection between Volt® Brain and Matrix top stage -
SmartSystem Matrix Chimera Multi port to Volt Brain Cable (15cm/5.9in)
Cable designed to power STEADICAM® VOLT from Chimera SLED via MULTI Port using AUX Channel Cable length 15cm/5.9″ WIRING DIAGRAM… -
SmartSystem Matrix Chimera MPX port to Volt Brain Cable (34cm / 13in)
Cable designed to power STEADICAM® VOLT from Chimera SLED using MPX Port Cable length 34cm /13″ This product is already… -
SmartSystem Matrix Chimera MPX port to C-Battery Cable (9cm/3.5in)
Cable designed to power the STEADICAM® VOLT passing through MPX connectors from Chimera SLED C-Battery Cable length 9cm/3.5″ This product… -
SmartSystem Vest Lite Chest Pad
Additional Chest pad compatible with Vest Lite. Washing machine proof. -
SmartSystem Vest Lite Belly Pad
Additional Belly pad compatible with Vest Lite. Washing machine proof. -
SmartSystem Monitor Rods with Clamp for Matrix Sleds
Monitor rods with clamp designed to fit Matrix sled posts (1.57″ / 40mm) The kit include two 15mm carbon fiber… -
SmartSystem Monitor Rods with Clamp for 2.00″ post
Monitor rods with clamp designed to fit 2.00″ posts. The kit include two 15mm carbon fiber rods with a lenght… -
SmartSystem Monitor Rods with Clamp for 1.75″ post
Monitor rods with clamp designed to fit 1.75″ posts. The kit include two 15mm carbon fiber rods with a lenght… -
SmartSystem Monitor Rods with Clamp for 1.5″ post
Monitor rods with clamp designed to fit 1.5″ posts. The kit include two 15mm carbon fiber rods with a lenght… -
SmartSystem Monitor Rods with Clamp for 1.37″ post
Monitor rods with clamp designed to fit 1.37″ posts. The kit include two 15mm carbon fiber rods with a lenght… -
SmartSystem Matrix Sled R2 Vlock Adapter
Vlock Battery Adapter for Matrix Sled R2 and Matrix Sled R2 LITE RONITY -
SmartSystem Matrix Sled R2 3Studs Adapter
3Studs Battery Adapter for Matrix Sled R2 and Matrix Sled R2 LITE RONITY -
SmartSystem Matrix Sled 10pcs Fuses kit
10pcs of fuses with current optimized for Matrix C-Battery and Sled Intelligent Battery packs -
SmartSystem Matrix R2 to Extreme VLock Upgrade Kit
Thanks to the modularity of the Matrix Sled, your R2 Sled can be transformed into a full EXTREME one. … -
SmartSystem Matrix R2 to Extreme 3Studs Upgrade Kit
Thanks to the modularity of the Matrix Sled, your R2 Sled can be transformed into a full EXTREME one. … -
SmartSystem Matrix R2 Counterweight plate
Counterweight plate designed to add mass on the bottom of your Matrix R2 or R2 Lite Sled if necessary. … -
SmartSystem Matrix R2 Counterweight kit
Counterweight plate with 10x counterweights included specifically designed to add mass on the bottom of your Matrix R2 or R2… -
SmartSystem Matrix Gimbal (38.1mm / 1.5″ posts)
Professional gimbal with dual bearings configuration for every axis of rotation (TILT-ROLL-YAW). Compatible with 38.1mm or 1.5″ posts (carbon fiber… -
SmartSystem Matrix Dovetail Camera Plate [Standard]
Standard Dovetail camera plate for Matrix Sleds Length : 6.7inches (170mm) -
SmartSystem Matrix Dovetail Camera Plate [Long – 13inches]
Long Dovetail camera plate for Matrix Sleds -
SmartSystem LCD Bracket (Lateral mount) with Standard Matrix Rods Attachment
LCD Monitor Attachment derived from Matrix Sled. Engineered to be lightweight as ultra stable. Designed to be compatible with every… -
SmartSystem Intelligent Dual Vlock Battery Plate 12V/24V
SKU: 000002528 Dual battery pack for Vlock Batteries with integrated electronics for Matrix Sleds able to subdivide power to… -
SmartSystem Intelligent Dual 3Studs Battery Plate 12V/24V
Dual battery pack for 3Studs Batteries with integrated electronics for Matrix Sleds able to subdivide power to various appliances like:… -
SmartSystem Extreme to R2 VLock Upgrade Kit
Thanks to the modularity of the Matrix Sled, your Extreme Sled can be transformed into a full R2 one. … -
SmartSystem 15mm Carbon Fiber Rods with end joint for Matrix sled
15mm carbon fiber rod with embedded battery joint designed for Matrix sleds. -
SmartSystem Extreme to R2 Lite VLock Upgrade Kit
Thanks to the modularity of the Matrix Sled, your Extreme Sled can be transformed into a full R2 Lite one.… -
SmartSystem Extreme to R2 Lite 3Studs Upgrade Kit
Thanks to the modularity of the Matrix Sled, your Extreme Sled can be transformed into a full R2 one. … -
SmartSystem Extreme to R2 3Studs Upgrade Kit
Thanks to the modularity of the Matrix Sled, your Extreme Sled can be transformed into a full R2 one. … -
SmartSystem C-Battery V-Lock Mount w/ Adapter
C-Battery plate is the necessary accessory for Matrix Sled to grant to you the possibility to mount: additional Battery for… -
SmartSystem C-Battery Three Studs Mount w/ Adapter
C-Battery with ThreeStuds Mount is the necessary accessory for Matrix Sled to grant to you the possibility to mount: additional… -
SmartSystem C-Battery Counterweight
Counterweight designed to add mass on the bottom of your Matrix Sled if necessary. Every counterweight has a weight of… -
SmartSystem ArmX1 Spin Post Bearing Upgrade Kit
With this kit, it is possible to transform the standard ArmX1 Arm Post into a free-spinning friction-less Arm Post. -
SmartSystem ArmX1 Rain Suit
A fully insulated Rain Suit for ArmX1. Completely made in soft waterproof high quality Neoprene -
SmartSystem ArmX1 Rain Cover
The most versatile Rain Cover for your ArmX1. It protects your preferred stabilizing arm from dust, everyday usage as well… -
SmartSystem ArmX1 Mating Block – S31803 Duplex Stainless Steel
Hi-performance Mating block industry standard compatible and specifically designed for ArmX1. With 368grams / 0.82 lbs, made with S31803 Duplex… -
SmartSystem ArmX1 Mating Block – 7075 Ergal Aluminum
Standard Mating block, in bundle with every ArmX1, industry standard compatible. Made in 7075 Ergal aluminum, shot peened and hard… -
SmartSystem ArmX1 Arm Post Locking Knob
Arm Post Locking Knob for ArmX1 Technical Note : In case of emergency, it can be replaced with a commercial… -
SmartSystem Arm Post 1/2in – Stick Out 40mm / 1.5in
ArmX1 arm post with 1/2″ diameter and stickout of 40mm / 1.5″ -
SmartSystem Arm Post 1/2in – Stick Out 140mm / 5.5in
ArmX1 arm post with 1/2″ diameter and stickout of 140mm / 5.5″ -
SmartSystem 1/4” Photographic Screws
Ensure a stable fixing of your equipment with high quality inox steel screws Cinema design Compatible with major plates on… -
SmartSystem U-Bracket for 5/8″ post designed for Steadicam M2
U-Bracket designed to be compatible with steadicam® M2 gimbal It let you increase the distance from the arm post and… -
SmartSystem U-Bracket for 5/8″ post designed for steadicam M1
U-Bracket designed to be compatible with steadicam® M1 gimbal It let you increase the distance from the arm post and… -
SmartSystem U-Bracket for 5/8″ post designed for GPI PRO Sled
U-Bracket designed to be compatible with GPI® PRO Sled gimbal It let you increase the distance from the arm post… -
SmartSystem U-Bracket for 5/8″ post
U-Bracket for Matrix Sled. Especially designed for Matrix R2 Lite in “Ronity” configuration. It let you increase the distance from… -
SmartSystem SmartHEAD M8 d.15mm Threaded Rod
15mm high modulus Carbon Fiber rod. M8 male front threaded for a stable connection with Matrix Threaded bracket NOTE… -
SmartSystem Sled to Tripod Adapter
Designed for and easy and quick camera swap from Matrix Sled to a tripod The adapter can be fixed on… -
SmartSystem Matrix Standard Rods Bracket
Standard Rods Bracket for Matrix Sled. Designed for Carbon rods with a diameter of 15mm. Center-to-center distance : 100mm -
SmartSystem Matrix Sled Docking Bracket
Docking bracket for docking and correctly balancing the Matrix Sled. Equipped with Gimbal lock (including retaining pin) Plastic Gimbal 5/8″… -
SmartSystem Matrix M8 d.15 Threaded Rods bracket / 60mm
Additional bracket for Matrix Sled for a safe and decoupled connection for low mode monitor. Compatible only with M8 d.15 threaded… -
SmartSystem J-Bracket for 5/8″ post designed for Steadicam M2
J-Bracket with 5/8″ arm post designed for steadicam® M2 Gimbal – SmartSystem Arm X1 – PRO® GPI® Titan® and Atlas®… -
SmartSystem J-Bracket for 5/8″ post designed for Steadicam M1
J-Bracket with 5/8″ arm post designed for steadicam® M1 Gimbal – SmartSystem Arm X1 – PRO® GPI® Titan® and Atlas®… -
SmartSystem J-Bracket for 5/8″ post designed for GPI PRO Sled
J-Bracket with 5/8″ arm post designed for GPI® PRO Sled – SmartSystem Arm X1 – PRO® GPI® Titan® and Atlas®… -
SmartSystem Stabilizer J-Bracket for 5/8″ post
J-Bracket with 5/8″ hole compatible with – SmartSystem Arm X1 – PRO GPI Titan and Atlas Arms – FlowCine XArm… -
SmartSystem Stabilizer Stand – Avenger A0035CS
This is a chrome plated steel stand with 4 sections and 3 risers. The A0035CS has a 5/8″ Baby top… -
SmartSystem Matrix Sled Docking Bracket
Docking bracket for docking and correctly balancing the Matrix Sled. Equipped with Gimbal lock (including retaining pin) Plastic Gimbal 5/8″… -
SmartSystem Lightweight Stabilizers Stand (with 5/8 pivot)
Min to Max height range: 109 to 205 cm (42.9" to 80.7") Base spread diameter:61 to 120 cm (24" to… -
SmartSystem Black Sand Bag Empty – up to 10kg (22lbs)
Medium-sized sandbag for balancing heavy gear Max payload of 10Kg (22lbs) when filled Made of resilient black nylon Does not… -
SmartSystem Chimera Sled Trolley w/ Customizable Space
Shaped Foam on first level to perfectly fit exclusively CHIMERA Sleds Cubed foam customizable by the customer on the second level… -
SmartSystem Matrix One Bundle Trolley
Polypropylene outer case with two compartments Shaped Foam on first level to perfectly fit any Matrix Sleds Shaped Foam on… -
SmartSystem Chimera One Bundle Trolley
Polypropylene outer case with two compartments Shaped Foam on first level to perfectly fit exclusively CHIMERA Sleds Shaped Foam on… -
SmartSystem U-Bracket for 5/8″ post designed for Steadicam M2
U-Bracket designed to be compatible with steadicam® M2 gimbal It let you increase the distance from the arm post and… -
SmartSystem U-Bracket for 5/8″ post designed for steadicam M1
U-Bracket designed to be compatible with steadicam® M1 gimbal It let you increase the distance from the arm post and… -
SmartSystem U-Bracket for 5/8″ post designed for GPI PRO Sled
U-Bracket designed to be compatible with GPI® PRO Sled gimbal It let you increase the distance from the arm post… -
SmartSystem U-Bracket for 5/8″ post
U-Bracket for Matrix Sled. Especially designed for Matrix R2 Lite in “Ronity” configuration. It let you increase the distance from… -
SmartSystem SmartHEAD M8 d.15mm Threaded Rod
15mm high modulus Carbon Fiber rod. M8 male front threaded for a stable connection with Matrix Threaded bracket NOTE… -
SmartSystem Sled to Tripod Adapter
Designed for and easy and quick camera swap from Matrix Sled to a tripod The adapter can be fixed on… -
SmartSystem Matrix Standard Rods Bracket
Standard Rods Bracket for Matrix Sled. Designed for Carbon rods with a diameter of 15mm. Center-to-center distance : 100mm -
SmartSystem Matrix Stabilizer Screws kit
Kit of screws for Matrix Sled dovetail made in premium stainless steel -
SmartSystem Matrix Sled to Volt® Bracket
Bracket specifically design to grant a stable and vibration-free connection between Volt® Brain and Matrix top stage -
SmartSystem Matrix M8 d.15 Threaded Rods bracket / 60mm
Additional bracket for Matrix Sled for a safe and decoupled connection for low mode monitor. Compatible only with M8 d.15 threaded… -
SmartSystem J-Bracket for 5/8″ post designed for steadicam M2
J-Bracket with 5/8″ arm post designed for steadicam® M2 Gimbal – SmartSystem Arm X1 – PRO® GPI® Titan® and Atlas®… -
SmartSystem J-Bracket for 5/8″ post designed for Steadicam M1
J-Bracket with 5/8″ arm post designed for steadicam® M1 Gimbal – SmartSystem Arm X1 – PRO® GPI® Titan® and Atlas®… -
SmartSystem J-Bracket for 5/8″ post designed for GPI PRO Sled
J-Bracket with 5/8″ arm post designed for GPI® PRO Sled – SmartSystem Arm X1 – PRO® GPI® Titan® and Atlas®… -
SmartSystem Hard Mount with Mitchell and Tube attachment
Ultra rigid Hard mount compatible with every stabilizer arm based on the industry standard mating block. The core plate has… -
SmartSystem ArmX1 Drop Down Kit
Going down to the floor has never been easier. Compatible with all ArmX1 ever manufactured, it can let you mount… -
SmartSystem SmartCAM Horizon Lite
Key Features Brushless Monitor Stabilizer with central monitor attachment. No counterbalance weights Push Pull connectors for daisy-chain connection with your… -
SmartSystem SmartCAM Horizon
SmartCAM Horizon is the first Brushless Monitor Stabilizer on the market specifically designed for Steadicam and gimbals operators. Technically speaking,… -
SmartSystem Matrix One R2 Lite Bundle
Based on Matrix 40mm / 1.57″ post in R2 Lite flavor as well as with ArmX1, the Matrix One R2… -
SmartSystem Matrix One Chimera Bundle
Based on Matrix 40mm / 1.57″ post in Chimera flavor as well as with ArmX1 and Volt™ by STEADICAM™ -
SmartSystem Matrix One ULTRA Lite Bundle
Based on Matrix 40mm / 1.57″ post in ULTRA Lite flavor as well as with ArmX1, the Matrix One ULTRA… -
SmartSystem Vest Lite
Design update : New metal Buckle for the chest plate (soon with updated images) Great comfort and Perfect fit to… -
SMART SYSTEM MATRIX SLED R2 LITE “RONITY”
Professional Sled with 40mm Telescopic Post designed to work with DJI™ Ronin™2 thanks to the Ronin2 Plate adapter included in… -
FLOWCINE GLINK CASE
The GLINK Case is a dual layered, custom foamed Peli AIR 1637 travel case, equipped with wheels and retractable handle… -
FLOWCINE DOCKING STATION
The GLINK Docking Station allows the operator to easily store all necessary GLINK parts in one place while working on… -
FLOWCINE CF RING FOOT
The GLINK CF Ring Foot allows trouble free resting position on any kind of surface for the GLINK CF Ring.… -
FLOWCINE MOVI R2 MOUNT
The GLINK MoVI R2 Mount is made to allow you to fine tune the balance around tilt on your gimbal… -
FLOWCINE CF RING
The GLINK CF Ring consists of both the GLNK CF top frame and the CF bottom frame. Both frame units… -
FLOWCINE BACK RELIEF PAD
The xSPINE Back relief pad, is designed to more evenly distribute the payload of your sled or GLINK, spreading the… -
FLOWCINE HANDHELD MOUNT
The GLINK handheld mount is a telescopic mount for either hard mounted cameras and/or electronic heads such as the ARRI… -
FLOWCINE MONITOR CLAMP FOR CF RING
The GLINK Monitor clamp for CF ring lets the operator quickly add extra mounting points for monitors or other accessories.… -
FLOWCINE XSPINE BABY PIN MOUNT
The xSPINE Baby pin mount allows the operator to store the xSPINE vest on basically any kind of pin not… -
FLOWCINE TOOL RACK
The GLINK Docking Station Tool rack allows a user to be able to mount allen key tools directly on the… -
FLOWCINE TOOL CLIP-ON
The xSPINE tool clip-on is a small clip, designed to be mounted on any of the two xSPINE front CF… -
FLOWCINE ACCESSORIES CLIP-ON
The xSPINE accessory clip-on is a small clip, designed to be mounted on any of the two xSPINE front CF… -
FLOWCINE SPACER PADS
For some smaller operators, the xSPINE can feel a bit too large, even at the smallest settings. For you we… -
FLOWCINE GLINK 1.5
The GLINK 1.5 is a new type of high-end gimbal body support system, for those who look for the best!… -
FLOWCINE FRONT MOUNT
The xSPINE Front mount is mounted at the front of the xSPINE, and replaces the ordinary CF dual bar grip… -
FLOWCINE XBONE CF
The xBONE CF is a low weight back mount for the Flowcine xSPINE vest. The xBONE CF allows the user… -
FLOWCINE GLINK SPRING CORES
The GLINK Spring cores are based on the same type of polymer spring technology Flowcine developed for the xARM. The… -
FLOWCINE LOW MODE ANGLED LINK BRACKET
The Low mode angled link bracket is used in low mode to join various length xARM extended arm posts with… -
FLOWCINE XR3ACH WATERPROOF COVER
The xR3ACH Waterproof cover, is our thinnest and softest cover for the xR3ACH back mount. Its inner fleece material keeps… -
FLOWCINE XR3ACH WINTER SOFTSHELL COVER
The Winter softshell cover is a neoprene cover that keeps your xR3ACH performing at its best at sub-zero temperature (0C/32F… -
FLOWCINE GLINK UPGRADE 1.5
The GLINK 1.5 offers significant upgrades in performance over the previous GLINK V1.0. The following features and upgrades has been… -
FLOWCINE XSPINE – VARIO 5 MOUNT
The xSPINE Vario 5 mount allows an operator to connect a Easyrig Vario 5 to the back of the xSPINE… -
FLOWCINE XSPINE – WALTER KLASSEN MOUNT
The xSPINE Walter Klassen mount allows an operator to quickly connect any type of WK Flex harness product such as… -
FLOWCINE XSPINE – CINEMA 2.5/3 MOUNT
The xSPINE Cinema 2.5 / 3 mount allows an operator to quickly connect a Easyrig support bar to the back… -
XO-Boom
The XO-Boom support system transfers the weight of a boom pole from the operator's arms and shoulders to their hips,… -
AntigravityCam Suspension Vest Stabilizer
Capture dynamic floating shots with the AntigravityCam Suspension Vest Stabilizer from Cinema Devices. This vest and suspension pole-based stabilizer enables… -
Upgrade CinemonitorHD8 X-SBL 1500Nits to 2500Nits
Upgrade of CinemonitorHD8 1500 Nits display to 2500 Nits display (only at factory) -
Upgrade CinemonitorHD to CinemonitorUHD
The CinemonitorHD becomes CinemonitorUHD. CinemonitorUHD has a new firmware with advanced peaking and 6G input ready. New metadata extraction for… -
-
Protective plate for StarliteHD
Protective plate for transportation with magnetic attachment The Transportation Cover Plate magnetic will protect the screen of your StarliteHD during… -
Sun Hood for Stargate
The Sun Hood from Transvideo is designed to protect the Stargate 7" monitor screen from direct sunlight. It is made… -
Aaton-Camera Intelligent wooden grip handle for cameras
Aaton-Cameras smart grip handle controls the functionality of cameras. It features 6 position joystick, a scroll wheel and 3 user-assigned… -
-
Starlite ARRI-WVS Standard Package
ARRI Transvideo Starlite ARRI-WVS is a 5″ OLED Monitor with touch functionality, an integrated H.264 recorder, and an integrated wireless… -
StarliteRF-a Monitor only
5” OLED 3G/HD/SD - SDI Monitor-Recorder with a built-in wireless receiver StarliteRF-a is compatible with all camera version. It can… -
Anton Bauer Battery back For Stargate & CineMonitorUHD8
The Transvideo Anton-Bauer Gold-Mount Battery Back is designed for use with 8" CinemonitorHD monitors (no handle), and the 7" RainbowHD… -
V-Mount Battery back for Stargate & CineMonitorUHD8
The Transvideo V-Mount Battery Back is designed for use with 8" CinemonitorHD monitors (no handle), and the 7" RainbowHD Monitor.… -
StarliteRF-a Standard Package
The StarliteRF-a Wireless Monitor/Recorder Kit from Transvideo features a StarliteRF-a monitor and a TitanHD2 transmitter that connects to the EXT… -
CineMonitorHD15 3DView S
The Transvideo 15" CineMonitorHD15 3DView S Field Monitor features many tools and functions plus 3D processing. Each camera/eye can be… -
CineMonitorHD10 3DView S
The 10" CineMonitorHD10 3DView Evolution from Transvideo features a comprehensive set of 3D tools, including 3 Anaglyph, Monochrome and Shutter… -
CineMonitorUHD15 SBL Evolution (Web only)
The 15" CineMonitor HD SBL Video Monitor from Transvideo supports video at resolutions up to 1920 x 1080. It features… -
CineMonitorUHD12 eSBL Evolution
The 12" CineMonitor HD eSBL Video Monitor from Transvideo supports video at resolutions up to 1920 x 1080. It features… -
CineMonitorUHD10 eSBL Evolution
The 10" CineMonitor HD eSBL Video Monitor from Transvideo supports video at resolutions up to 1920 x 1080. It features eSBL technology for… -
CineMonitorUHD8 eSBL Evolution
The 8" CineMonitor HD eSBL Video Monitor from Transvideo supports video at resolutions up to 1920 x 1080. It features… -
CineMonitorUHD8 X-SBL Evolution
The 8" CineMonitor HD X-SBL Video Monitor from Transvideo supports video at resolutions up to 1920 x 1080. It features X-SBL technology for an… -
CineMonitorUHD6 SBL+ Evolution
The 6" CineMonitor HD SBL+ Video Monitor from Transvideo supports video at resolutions up to 1920 x 1080. It features… -
Starlite ARRI WVS Monitor only
5" OLED 3G / HD / SD - SDI monitor recorder with a built-in wireless reciever Especially designed for ARRI… -
Transvideo Sun Hood for StarliteHD
The Sun Hood from Transvideo is designed to protect the StarliteHD or StarliteHD5-ARRI 5" monitor screen from direct sunlight. It… -
Transvideo StarliteHD V1 to V2 Upgrade Kit
Upgrades are available for all StarliteHD5-ARRI(*) with any serial number. and StarliteHD(*) with serial numbers beginning with the following characters… -
Transvideo StarliteHD-m “Metadator” Full package (ARRI, RED, SONY, PANASONIC, BMC)
The Missing Link between Cameras, Lenses, Post Productions & VFX Simple to use - no hassle to set-up Simple MultiCam… -
Transvideo StarliteHD+ ARRI Standard Package
Inspired by the StarliteHD core technologies With its new hardware, the StarliteHD+ has all StarliteHD V2 functionalities and much more.… -
Transvideo StarliteHD+ ARRI Monitor only
The 5" OLED Touchscreen Monitor from Transvideo offers a display resolution of 1280 x 720 and brightness of 380 cd/m². It records in H.264… -
Transvideo Stargate 7″ Monitor-Recorder and 1080p Display (Monitor only)
The Stargate 7" Monitor-Recorder from Transvideo features 800 cd/m2 brightness with a contrast ratio of 800:1. It features 3G/HD/SDI and… -
Transvideo StarliteHD-m “Metadator” Monitor only
The Missing Link between Cameras, Lenses, Post Productions & VFX Simple to use - no hassle to set-up Simple MultiCam… -
Transvideo Starlite HD+ Standard Package
Inspired by the StarliteHD core technologies With its new hardware, the StarliteHD+ has all StarliteHD V2 functionalities and much more.… -
Transvideo Starlite HD+ Monitor only
The 5" OLED Touchscreen Monitor from Transvideo offers a display resolution of 1280 x 720 and brightness of 380 cd/m². It records in H.264… -
Transvideo Stargate 7″ Monitor-Recorder and 1080p Display Package
The Stargate 7" Monitor-Recorder from Transvideo features 800 cd/m2 brightness with a contrast ratio of 800:1. It features 3G/HD/SDI and… -
Egripment Power Grip-Car Mount
The Egripment Power Grip comprises of a large suction cup and an integrated, hand operated, vacuum pump. There is a… -
Egripment Gimble
Egripment's Gimble is designed to level your camera on any car rig, wooden platform, camera riser, bazooka set, etc. During… -
Egripment Seat Supports
Egripment supplies a variety of seat supports. All seat supports fit on all Egripment dollies, cranes and platforms. Seat supports… -
Egripment Skateboard (Track) Wheels
Egripment Skateboard Wheels are made for precision and endurance. The parts are manufactured out of Aluminum and Stainless steel providing… -
Egripment Wheels Platform & Crane Dollies
WHEELS With the accessories for the dollies, you can make your dolly more multifunctional. They have been all designed to… -
Egripment Offset Arms
Low Angles (Offset arms) are usually used instead of the standard camera leveller to mount a camera to the end… -
Egripment Lowbowl 100/150mm Triangle Plate
Our lowbowl is designed to mount cameras on places where a tripod is not practical, such as on boats, trees,… -
Egripment Camera Levellers
Egripment offers a variety of camera levellers, such as 100 mm bowl, 150 mm bowl and Mitchell. -
Egripment Camera Risers
Our camera risers are available in various heights from 10, 20, 30 and 40 cm. They can be stacked on… -
Egripment Camera Clamps 100/150mm
Our camera clamps are designed to mount cameras on places where a tripod is not practical, such as on boats,… -
Egripment Columns
We have different type of columns. Crane columns or dolly columns are different in sizes and stability. We also have… -
Egripment Bazooka
The Egripment Bazooka is a solid, levellable triangle floor section plus a set of 4 bazooka riser sections each of… -
Egripment Tracks
STEEL TRACK STRAIGHT & CURVED Egripment's steel track is designed to support all types of loading in the safest possible… -
Egripment Xtreme T10 Encoded Telescoping Crane
Following our ground breaking Telescoping Xtreme T12 Carbon Fiber Crane first produced in 2010, Egripment has now created a further… -
Egripment TDT Encoded Crane
The TDT Encoded crane arm is available in different sizes: (i) TDT 3 MTR VERSION (ii) TDT 4.5 MTR VERSION… -
Egripment StarCam MK II Encoded Column
The Egripment StarCam MKII is the latest version of the Egripment StarCam Tower Product Line. It boasts evolutionary improvements and… -
Egripment G-Track Encoded Dolly
The G-Track-System is designed in such a way that the G-Track can be used as a base for many different… -
Egripment 306 Encoded Remote Head
The 306 Remote Head can easily accommodate ENG type cameras as well as modern Digital Cine Cameras. This new State… -
Egripment 205 Encoded Remote Head
The Egripment 205 Remote Head is our latest Head in the extensive line of Egripment Remote Camera Heads. Following in… -
Egripment Skateboard (Track) Wheel Dollies
Egripment Skateboard Wheels are made for precision and endurance. The parts are manufactured out of Aluminum and Stainless steel providing… -
Egripment Hi-Lo Platform
The Hi-Lo Platform is designed to provide the cameraman with an easy, safe and stable platform. The platform is ideally… -
Egripment Sports Dolly
The Sports Dolly is a camera platform that offers a stable and flexible base which is easily transportable to any… -
Egripment Sports Base
The SPORTSBASE is constructed from a super lightweight, 100% aluminium base, consisting of a modular frame with a solid seat… -
Egripment Skateboard Dolly
The Skateboard Dolly is Egripment's platform track dolly for quick, multi purpose and easy use. The cooperation between Egripment's designers… -
Egripment Dinky Dolly
The Dinky Dolly is a unique, portable, 4 wheel steering dolly manufactured with a solid frame. Equipped with pneumatic wheels,… -
Egripment Matador Dolly
The Matador Dolly is a lightweight dolly on which a seat swivel support or JanJib can be mounted. A non-slip… -
Egripment Slider
The Egripment Slider is the latest product from Egripment. The Egripment Slider is portable, easy to set up and comes… -
Egripment Starcam XL
THE HIGHER YOU GET, THE BETTER THE VIEW! The Egripment StarCam XL is the longest version of the Egripment StarCam… -
Egripment Starcam MK II
The Egripment StarCam MKII is the latest version of the Egripment StarCam Tower Product Line. It boasts evolutionary improvements and… -
Egripment Starcam Studio
The Egripment StarCam Studio is the latest version of the Egripment Starcam tower product line. Evolutionary improvements and based on… -
Egripment Generic Track System
The G-Track-System is designed in such a way that the G-Track can be used as a base for many different… -
Freefly Egripment Joystick
Based on our well-known and industry proven Joysticks Controls, Egripment developed a Joystick control for the uprising demand for the… -
Controls
Egripment offers a variety of Joysticks, Zoom & Focus controls, Panbar, Handgrips or Cranck handles to control your Egripment Remote… -
Egripment 312/MK II Panbar Control
The standard way to control a camera has now been updated. Egripment’s Panbar control can now operate any of Egripment… -
Egripment Hothead MK3 (IP)
For decades the HOTHEAD has been a household name in the television and film industry. Egripment’ s years of experience… -
Egripment 306/D Digital Remote Head
The 306/D Digital Remote Head can easily accommodate ENG type cameras as well as modern Digital Cine Cameras. This new… -
Egripment 306 Remote Head
The Egripment 306 Remote Head is a completely nodal head in the extensive line of Egripment Remote Camera Heads. Based… -
Egripment 301 Remote Head
The Egripment 301 Remote Head is our universal remote head in the extensive line of Egripment remote camera heads. The… -
Egripment 205/D Digital Remote Head
Egripment’s digital head for the modern size smaller broadcast cameras & digital film cameras. Following in the footsteps of our… -
Egripment 205 Remote Head
The Egripment 205 Remote Head is our little giant in the extensive line of egripment remote camera heads. following in… -
Egripment 106 Remote Head
LIGHTWEIGHT, ROBUST AND SMOOTH MOVEMENTS The 106 head is the smallest among the remote controlled camera heads. In combination with… -
Egripment Super Javelin MK II
The Super Javelin MK II is an ultra modern crane system with a partially "open" design structure that is being… -
Egripment-JanJib Remote
The Egripment JanJib system offers a completely new method of building a jib arm. As a result of our unique… -
Egripment TDT crane
The TDT Remote Crane System is a new concept for a lightweight Remote Camera Crane and Remote Head combined as… -
Motocrane Revolt TB50 to 3-Pin XLR Smart Adapter
Power without constraint. The World’s first TB50 to 3-Pin XLR Smart Adapter for providing open-source power to the DJI Ronin… -
Egripment-Xtreme T12
The Xtreme T12 is the telescoping crane that the film and tv production world has been waiting for. The Xtreme… -
Egripment-Xtreme T10 Arc Compensation
ARC COMPENSATION OF THE XTREME T10 There are three ways to define an automatic telescope movement, related to pan and… -
Egripment-Xtreme T10
XTREME T10 Following our ground breaking telescoping Xtreme T12 carbon fiber crane first produced in 2010, Egripment has now created… -
EGRIPMENT-JANJIB SYSTEMS
The Egripment JanJib system offers a completely new method of building a jib arm. As a result of our unique… -
EGRIPMENT-TELESCOPIC MINIJIB SHORT
Our "new and improved” MiniJib, available in a short- and a long version. The "new and improved" MiniJib Short telescopic… -
EGRIPMENT-GENIE JIB
The Genie Jib is a lightweight mini jib that can be extended by a sliding lock off system. The Genie… -
Egripment – JanJib Fixed
The Janjib system offers two fixed jibs. The JanJib F75 and the JanJib F120 both have a load capacity of… -
Cyclo 1-axis Stabilized Head
Create stunning shots. Have a great time doing it. Cyclo modular head is built for Steadicam™ operators who want to… -
Panther Precision Vario Track Mk II
Telescopic Vario Sleeper The Precision Vario Track is manufactured of Aluminium and o ers because of a speci cally constructed… -
-
Smartsystem Matrix Sled Chimera – VLock
The CHIMERA version is the ultimate tool for Cinema cameras. The perfect fusion between all the specs of Matrix Sled EXTREME and the technology… -
Panther BUDDY PLUS Dolly
Buddy with Classic Body The Buddy Plus dolly is a versatile Film and Video dolly. Compact measurements, extreme stability and… -
Panther HIGH LOW TURNSTILE
Item No. 175067 HIGH LOW TURNSTILE consisting of: Panther High Low Turnstile -
Panther DOUBLE BRACKETS
Panther DOUBLE BRACKETS BOWLS, MITCHELL AND MORE With a variety of Panther accessory, many combinations are possible. No matter what… -
Panther Vario Rig System
VARIO RIG - Low Rig, High Rig, Any Rig Use exactly what you need With the Panther Vario Rig you… -
VIBRATION ISOLATOR
A new way of smoothness. The Vibration Isolator (310064) absorbs vibrations in the X- and Y-axis. Smoother shots without disturbing… -
ISO DAMPENER PRO
ISO DAMPENER PRO Additional horizontal smoothness for your remote head. payload: 90 kg / 200 lbs -
MINI SHOCK ABSORBER Pro
For a smooth footage Vertical vibrations are absorbed by the Mini Shock Absorber Pro (311492). Remote Heads but also stabilized… -
Panther FOXY PRO Crane
THE NEXT STEP Safety for camera crane operators has always been in mind for us. We want to offer the… -
-
PANTHER S-Type
S-Type A dolly that proves, that nothing is impossible The Panther S-Type Dolly combines the advantages of different dolly concepts:… -
Panther Mitchell Offset Bracket 17cm
Panther Mitchell Offset Brackets Safe and flexible at the same time The Mitchell Offset Brackets are perfect for all Mitchell… -
Panther Mitchell Offset Bracket 33cm
Panther Mitchell Offset Brackets Safe and flexible at the same time The Mitchell Offset Brackets are perfect for all Mitchell… -
Panther Mitchell Offset Bracket 50cm 4-Way Leveller
Panther Mitchell Offset Brackets Safe and flexible at the same time The Mitchell Offset Brackets are perfect for all Mitchell… -
Panther Mitchell Offset Bracket 33cm 4-Way Leveller
Panther Mitchell Offset Brackets Safe and flexible at the same time The Mitchell Offset Brackets are perfect for all Mitchell… -
Panther Mitchell Offset Bracket 17cm 4-Way Leveller
Panther Mitchell Offset Brackets Safe and flexible at the same time The Mitchell Offset Brackets are perfect for all Mitchell… -
-
Panther Mitchell-Scaffold Adapter
The Mitchell-Scaffold Adapter (310468) adapts from standard rigging / scaffold tubes (48mm) to Mitchell. On the scaffold side you can… -
Panther Mitchell 4-Way Leveller
Mitchell 4-Way Leveller Mitchell to Mitchell with integrated leveling function The Mitchell-Mitchell 4-Way Leveller (310042) is an ideal supplement for… -
Panther Mitchell Riser
136910 Mitchell Riser 10 cm / 4″ 136937 Mitchell Riser 20 cm / 8″ 136939 Mitchell Riser 30 cm /… -
Panther Ladder Pod
Panther Ladder Pod This is Huge You focus on your work – and we do ours. The Ladder Pod is… -
Panther Rotary Adapter
A 360° rotating euro adapter (100512) for a perfect and smooth panning. In order to maintain a desired camera position… -
Panther Bazooka Kit
BAZOOKA KIT All in one case The Bazooka Kit (BK0001) allows great flexibility in camera positioning. Heights from 10 cm… -
Panther Vario Bazooka M
VARIO BAZOOKA M Height adjustable The Vario Bazooka M (204810) is an affordable alternative to the bigger guys Vario Bazooka… -
Panther Vario Bazooka + Vario Bazooka XL
VARIO BAZOOKA + VARIO BAZOOKA XL 2-Stage height adjustable The height-adjustable Vario Bazooka (173571) and Vario Bazooka XL (176960) comes… -
Panther Cranked Bazooka S
CRANKED BAZOOKA The Bazooka family gets bigger. And better. Height: 43 – 62 cm / 17 – 24,5″ -
Panther Cranked Bazooka M
CRANKED BAZOOKA The Bazooka family gets bigger. And better. Height: 62 – 100 cm / 24,5 – 39,5″ -
Panther Adapter Kit (Mitchell-Euro-Bowl)
ADAPTER KIT Smart solution for all situations To enable the maximum of flexibility on set we developed an All-In-One solution… -
Panther FLEX ARM
FLEX ARM Bring your accessories exactly there where you need it The name says it all The Panther Flex Arm… -
Panther Low Shot Plate
Suitable to every camera The Low Shot Plate (107104) can be mounted to an underslung fluid head to enable the… -
Panther Wedge-Tilt Plate 90°
From 0-90° Adjust continuously your camera with the Wedge-Tilt Plate (180066) from 0-90°. Combinations of mounting is flexible due to… -
Panther Rocker Plate
The Rocker Plate (302675) is an easy and very flexible Low Shot System. You can do great camera movements (pan… -
Panther Lightweight Jib
LIGHTWEIGHT JIB Simple but powerful Large but small The Panther Lightweight Jib (100399) is designed to offer a very large… -
Panther Vario Jib S
VARIO JIB S Half size but full power Telescopic on both sides The Vario Jib S (300744) is a versatile… -
Panther Vario Jib
Telescopic on both sides The Panther Vario Jib (300902) is a versatile camera Jib Arm. Telescopic arms on both sides… -
Panther Multi Glider Slider
MULTI GLIDER One System, Many Options Horizontally, Vertically and Diagonal The Multi Glider is a camera-slider with an integrated and… -
Panther Twister Level Platform (stackable)
Level Platform For the first time, the body of a platform dolly can be enlarged, not only by its length… -
Panther Twister Side platform
PLATFORMS Expand it The cameraman as well as the assistant can stand, sit or even knee on the Twister’s solid,… -
Panther FOXY PRO JIB
FOXY PRO JIB: The next step. Smaller. Sometimes it’s the small things The Foxy Pro can be used as a… -
Hollyland Solidcom C1 Pro-8S Full-Duplex Wireless Intercom System with 8 Headsets (1.9 GHz)
Key Features Two-Mic Environmental Noise Cancellation Reliable 1.9 GHz DECT 6.0 Technology True-Wireless Headset, No Bodypack Comfortable Single-Ear Headset Design… -
Hollyland Solidcom C1 Pro-6S Full-Duplex Wireless Intercom System with 6 Headsets (1.9 GHz)
Key Features Two-Mic Environmental Noise Cancellation Reliable 1.9 GHz DECT 6.0 Technology True-Wireless Headset, No Bodypack Comfortable Single-Ear Headset Design… -
Hollyland Solidcom C1 Pro-4S Full-Duplex Wireless Intercom System with 4 Headsets (1.9 GHz)
Key Features Two-Mic Environmental Noise Cancellation Reliable 1.9 GHz DECT 6.0 Technology True-Wireless Headset, No Bodypack Comfortable Single-Ear Headset Design… -
Hollyland Solidcom C1 Pro-3S Full-Duplex Wireless Intercom System with 3 Headsets (1.9 GHz)
Key Features Two-Mic Environmental Noise Cancellation Reliable 1.9 GHz DECT 6.0 Technology True-Wireless Headset, No Bodypack Comfortable Single-Ear Headset Design… -
Hollyland Solidcom C1 Pro-2S Full-Duplex Wireless Intercom System with 2 Headsets (1.9 GHz)
Key Features Two-Mic Environmental Noise Cancellation Reliable 1.9 GHz DECT 6.0 Technology True-Wireless Headset, No Bodypack Comfortable Single-Ear Headset Design…