Shop
-
FLOWCINE BLACK PRO CLAMP DUAL
SPECIFICATION: BLACK PRO CLAMP DUAL Shipping weight 1 kg Shipping dimensions 12 × 18 × 5 cm -
FLOWCINE BLACK PRO CLAMP SINGLE
SPECIFICATION: BLACK PRO CLAMP SINGLE Shipping weight 0.5 kg Shipping dimensions 11 × 12 × 5 cm -
FLOWCINE UNIVERSAL RACK FLOWCINE EDITION
SPECIFICATION: UNIVERSAL RACK FLOWCINE EDITION Shipping weight 2.6 kg Shipping dimensions 30 × 10 × 11 cm -
FLOWCINE STUB MOUNT
The Flowcine Stub mount is a small lightweight 50mm tube that you can attach through a car’s tow eye bolt… -
FLOWCINE RIGID NOSE MOUNT
SPECIFICATION: RIGID NOSE MOUNT Shipping weight 0.7 kg Shipping dimensions 30 × 20 × 10 cm -
FLOWCINE FRONT EXTENSION BLOCK
Extend your Black to accommodate a larger size gimbal. RECOMMENDED MAX LOADS: Bleow are the recommended max loads (including vibration… -
FLOWCINE 45MM EXTENSION RODS
SPECIFICATION: 45MM EXTENSION RODS Shipping weight 0.2 kg Shipping dimensions 10 × 10 × 10 cm -
FLOWCINE BLACK MITCHELL PLATE
SPECIFICATION: BLACK MITCHELL PLATE Shipping weight 0.2 kg Shipping dimensions 20 × 20 × 5 cm -
FLOWCINE MITCHELL MALE TO BOOM ADAPTER
SPECIFICATION: MITCHELL MALE TO BOOM ADAPTER Shipping weight 1.6 kg Shipping dimensions 25.5 × 15.5 × 15.5 cm -
FLOWCINE MALE MITCHELL MOUNT
SPECIFICATION: MALE MITCHELL MOUNT Shipping weight 0.8 kg Shipping dimensions 16 × 16 × 6 cm -
FLOWCINE FEMALE MITCHELL MOUNT
If your gimbal mounts with a Mitchell mount, this is the option you’re looking for SPECIFICATION: FEMALE MITCHELL MOUNT Shipping weight… -
FLOWCINE BLACK WIRE ANTI-VIBRATION MOUNT
WIRE AVM WEIGHT RANGES: The Wire AVMs are available in five different weight ranges. Pick the one that best match… -
FLOWCINE TRANQUILIZER PAN BARRELS
The Pan Barrels are the links that run around the Tranquilizer, dampening the pan axis. Gimbals/remote heads with stronger pan motors… -
FLOWCINE TRANQUILIZER
The Flowcine Tranquilizer is the next-generation of vibration isolators, specifically designed around the geometry of a electronic gimbal device. TRANQUILIZER… -
FLOWCINE THE BLACK ARM
The Black arm is a 3-axis dampening system with a additional vibration mount for stabilizing roll and tilt errors as… -
FLOWCINE 303® MARINE AEROSPACE PROTECTANT
Use the Aerospace Protectant fluid to keep you spring cores in top condition! -
FLOWCINE XADJUST
Updated socket block adjustment screws. INCLUDED IN THE BOX, FRONT MOUNT 2 x 1-¼”-20 UNC 30mm adjustment knob INCLUDED IN… -
FLOWCINE XSOCKET
INCLUDED IN THE BOX 1 x xSOCKET female block 1 x 1-¼”-20 UNC 40mm adjustment knob 1 x 1-¼”-20 UNC… -
FLOWCINE XPEG BABYPIN
The xPEG Babypin is a hook that you can attach wherever there is a baby pin, where you can hang… -
FLOWCINE XPEG AND XPEG RIP-TIE KIT
The xPEG is a hook that you mount on your cart, where you can hang your Steadicam arm. The xPEG… -
FLOWCINE XPEG RIP-TIE
The xPEG Rip-Tie allows the operator to tighten up the arm at the bottom shelf of the cart. SPECIFICATION: XPEG RIP-TIE… -
FLOWCINE XPEG
The xPEG is a hook that you mount on your cart, where you can hang your Steadicam arm. -
FLOWCINE XDROP
The xDrop is a male to female socket block connection bracket that drops the arm connection 85mm / 3.4″. INCLUDED… -
FLOWCINE XARM WINTER SOFTSHELL COVER
A heated cover for your xARM, used in cold environments. SPECIFICATION: WINTER SOFTSHELL COVER Shipping weight 0.5 kg Shipping dimensions 40… -
-
FLOWCINE XARM SUPER-HIGH/LOW MODE LINK BRACKET
INCLUDED IN THE BOX 1 x xARM link bracket SPECIFICATION: SUPER-HIGH/LOW MODE LINK BRACKET Shipping weight 0.3 kg Shipping dimensions… -
FLOWCINE XARM LOW MODE GRIP HANDLE
INCLUDED IN THE BOX 1 x Grip handle bar with 44 x UNC threads 1 x Arm post handle bar… -
FLOWCINE ARM POSTS
INCLUDED IN THE BOX 1 x 265mm long arm post 1 x 165mm long arm post 2 x Post grips -
FLOWCINE ARM POST HIGH/LOW MODE KIT
Complete kit of arm posts, link bracket and grip handle, for all possible high/low mode configurations. [embed]https://youtu.be/rSECk375pxM[/embed] Arm post high/low… -
FLOWCINE XMOUNT MITCHELL ADAPTER
SPECIFICATION: Material Stainless steel, titanium plated Weight 1622 g Dimensions Weight 2 kg Dimensions 25 × 21 × 20 cm -
FLOWCINE XMOUNT
The xMOUNT is a highly robust hard mount for Steadicam(™) usage, where the operator can easily dial in roll and… -
FLOWCINE XARM SPRING CORES
The xARM Spring cores are available in the following colors/weight ranges: Teal 8-14 Kg / 17.5-31 Lbs Green 14-19.5 Kg… -
FLOWCINE XARM
FEATURES IN SHORT Large range of different lifting capacities in one single arm. Up to 29 Kg / 64 Lbs… -
-
Litra Handle
Rugged aluminum core handle with a rubber grip for use with LitraTorch™ or LitraPro ™. The handle has a standard…