Flowcine
-
FLOWCINE GLINK CASE
The GLINK Case is a dual layered, custom foamed Peli AIR 1637 travel case, equipped with wheels and retractable handle… -
FLOWCINE DOCKING STATION
The GLINK Docking Station allows the operator to easily store all necessary GLINK parts in one place while working on… -
FLOWCINE CF RING FOOT
The GLINK CF Ring Foot allows trouble free resting position on any kind of surface for the GLINK CF Ring.… -
FLOWCINE MOVI R2 MOUNT
The GLINK MoVI R2 Mount is made to allow you to fine tune the balance around tilt on your gimbal… -
FLOWCINE CF RING
The GLINK CF Ring consists of both the GLNK CF top frame and the CF bottom frame. Both frame units… -
FLOWCINE BACK RELIEF PAD
The xSPINE Back relief pad, is designed to more evenly distribute the payload of your sled or GLINK, spreading the… -
FLOWCINE HANDHELD MOUNT
The GLINK handheld mount is a telescopic mount for either hard mounted cameras and/or electronic heads such as the ARRI… -
FLOWCINE MONITOR CLAMP FOR CF RING
The GLINK Monitor clamp for CF ring lets the operator quickly add extra mounting points for monitors or other accessories.… -
FLOWCINE XSPINE BABY PIN MOUNT
The xSPINE Baby pin mount allows the operator to store the xSPINE vest on basically any kind of pin not… -
FLOWCINE TOOL RACK
The GLINK Docking Station Tool rack allows a user to be able to mount allen key tools directly on the… -
FLOWCINE TOOL CLIP-ON
The xSPINE tool clip-on is a small clip, designed to be mounted on any of the two xSPINE front CF… -
FLOWCINE ACCESSORIES CLIP-ON
The xSPINE accessory clip-on is a small clip, designed to be mounted on any of the two xSPINE front CF… -
FLOWCINE SPACER PADS
For some smaller operators, the xSPINE can feel a bit too large, even at the smallest settings. For you we… -
FLOWCINE GLINK 1.5
The GLINK 1.5 is a new type of high-end gimbal body support system, for those who look for the best!… -
FLOWCINE FRONT MOUNT
The xSPINE Front mount is mounted at the front of the xSPINE, and replaces the ordinary CF dual bar grip… -
FLOWCINE XBONE CF
The xBONE CF is a low weight back mount for the Flowcine xSPINE vest. The xBONE CF allows the user… -
FLOWCINE GLINK SPRING CORES
The GLINK Spring cores are based on the same type of polymer spring technology Flowcine developed for the xARM. The… -
FLOWCINE LOW MODE ANGLED LINK BRACKET
The Low mode angled link bracket is used in low mode to join various length xARM extended arm posts with… -
FLOWCINE XR3ACH WATERPROOF COVER
The xR3ACH Waterproof cover, is our thinnest and softest cover for the xR3ACH back mount. Its inner fleece material keeps… -
FLOWCINE XR3ACH WINTER SOFTSHELL COVER
The Winter softshell cover is a neoprene cover that keeps your xR3ACH performing at its best at sub-zero temperature (0C/32F… -
FLOWCINE GLINK UPGRADE 1.5
The GLINK 1.5 offers significant upgrades in performance over the previous GLINK V1.0. The following features and upgrades has been… -
FLOWCINE XSPINE – VARIO 5 MOUNT
The xSPINE Vario 5 mount allows an operator to connect a Easyrig Vario 5 to the back of the xSPINE… -
FLOWCINE XSPINE – WALTER KLASSEN MOUNT
The xSPINE Walter Klassen mount allows an operator to quickly connect any type of WK Flex harness product such as… -
FLOWCINE XSPINE – CINEMA 2.5/3 MOUNT
The xSPINE Cinema 2.5 / 3 mount allows an operator to quickly connect a Easyrig support bar to the back… -
FLOWCINE XSPINE
The xSPINE is the world’s first vest for camera operators that can be used both for Steadicam™ and gimbal work.… -
FLOWCINE XSPINE + XR3ACH (Our most dynamic setup)
The xSPINE is the world’s first vest for camera operators that can be used both for Steadicam™ and gimbal work.… -
FLOWCINE XSPINE + XBONE CF (Carbon fibre back mount)
The xSPINE is the world’s first vest for camera operators that can be used both for Steadicam™ and gimbal work.… -
FLOWCINE XSPINE + FRONT MOUNT (For front mounted action)
The xSPINE is the world’s first vest for camera operators that can be used both for Steadicam™ and gimbal work.… -
FLOWCINE XR3ACH
The new hybrid back mount, giving you greater boom range and more stabilization! SPECIFICATION: XR3ACH Product weight 4480 g Materials Aluminium,… -
FLOWCINE QUICK RELEASE HOOK
Key Features For Use with Puppeteer, Easyrig & Gimbal Easily Remove & Hand the Gimbal Off -
FLOWCINE PUPPETEER HANDLE BAR GRIP
Puppeteer grip for your gimbals handle bar. SPECIFICATION: PUPPETEER HANDLE BAR GRIP Shipping weight 0.27 kg Shipping dimensions 15 × 8… -
FLOWCINE PUPPETEER TOP HANDLE GRIP
Puppeteer grip for your gimbals top handle. SPECIFICATION: PUPPETEER TOP HANDLE GRIP Shipping weight 0.19 kg Shipping dimensions 15 × 8… -
FLOWCINE 2-AXIS PUPPETEER
Smooth gimbal operation with total freedom. SPECIFICATION: 2-AXIS PUPPETEER Shipping weight 2 kg Shipping dimensions 40 × 20 × 10 cm -
FLOWCINE SERENE JUBILEE KITS
Two great Serene-based kits, to celebrate the Serenes 5 year anniversary! -
FLOWCINE SERENE BUNGEE GRIP
The Serene bungee grip is a small hook that holds the bungee cord in place. SPECIFICATION: SERENE BUNGEE GRIP Shipping weight… -
FLOWCINE SERENE TOUGH BANDS
Toughen up your Serene set-up. SPECIFICATION: SERENE TOUGH BANDS Shipping weight 0.5 kg Shipping dimensions 15 × 10 × 5 cm