Flowcine
-
FLOWCINE GLINK CASE
The GLINK Case is a dual layered, custom foamed Peli AIR 1637 travel case, equipped with wheels and retractable handle… -
FLOWCINE DOCKING STATION
The GLINK Docking Station allows the operator to easily store all necessary GLINK parts in one place while working on… -
FLOWCINE CF RING FOOT
The GLINK CF Ring Foot allows trouble free resting position on any kind of surface for the GLINK CF Ring.… -
FLOWCINE MOVI R2 MOUNT
The GLINK MoVI R2 Mount is made to allow you to fine tune the balance around tilt on your gimbal… -
FLOWCINE CF RING
The GLINK CF Ring consists of both the GLNK CF top frame and the CF bottom frame. Both frame units… -
FLOWCINE BACK RELIEF PAD
The xSPINE Back relief pad, is designed to more evenly distribute the payload of your sled or GLINK, spreading the… -
FLOWCINE HANDHELD MOUNT
The GLINK handheld mount is a telescopic mount for either hard mounted cameras and/or electronic heads such as the ARRI… -
FLOWCINE MONITOR CLAMP FOR CF RING
The GLINK Monitor clamp for CF ring lets the operator quickly add extra mounting points for monitors or other accessories.… -
FLOWCINE XSPINE BABY PIN MOUNT
The xSPINE Baby pin mount allows the operator to store the xSPINE vest on basically any kind of pin not… -
FLOWCINE TOOL RACK
The GLINK Docking Station Tool rack allows a user to be able to mount allen key tools directly on the… -
FLOWCINE TOOL CLIP-ON
The xSPINE tool clip-on is a small clip, designed to be mounted on any of the two xSPINE front CF… -
FLOWCINE ACCESSORIES CLIP-ON
The xSPINE accessory clip-on is a small clip, designed to be mounted on any of the two xSPINE front CF… -
FLOWCINE SPACER PADS
For some smaller operators, the xSPINE can feel a bit too large, even at the smallest settings. For you we… -
FLOWCINE GLINK 1.5
The GLINK 1.5 is a new type of high-end gimbal body support system, for those who look for the best!… -
FLOWCINE FRONT MOUNT
The xSPINE Front mount is mounted at the front of the xSPINE, and replaces the ordinary CF dual bar grip… -
FLOWCINE XBONE CF
The xBONE CF is a low weight back mount for the Flowcine xSPINE vest. The xBONE CF allows the user… -
FLOWCINE GLINK SPRING CORES
The GLINK Spring cores are based on the same type of polymer spring technology Flowcine developed for the xARM. The… -
FLOWCINE LOW MODE ANGLED LINK BRACKET
The Low mode angled link bracket is used in low mode to join various length xARM extended arm posts with… -
FLOWCINE XR3ACH WATERPROOF COVER
The xR3ACH Waterproof cover, is our thinnest and softest cover for the xR3ACH back mount. Its inner fleece material keeps… -
FLOWCINE XR3ACH WINTER SOFTSHELL COVER
The Winter softshell cover is a neoprene cover that keeps your xR3ACH performing at its best at sub-zero temperature (0C/32F… -
FLOWCINE GLINK UPGRADE 1.5
The GLINK 1.5 offers significant upgrades in performance over the previous GLINK V1.0. The following features and upgrades has been… -
FLOWCINE XSPINE – VARIO 5 MOUNT
The xSPINE Vario 5 mount allows an operator to connect a Easyrig Vario 5 to the back of the xSPINE… -
FLOWCINE XSPINE – WALTER KLASSEN MOUNT
The xSPINE Walter Klassen mount allows an operator to quickly connect any type of WK Flex harness product such as… -
FLOWCINE XSPINE – CINEMA 2.5/3 MOUNT
The xSPINE Cinema 2.5 / 3 mount allows an operator to quickly connect a Easyrig support bar to the back… -
FLOWCINE XSPINE
The xSPINE is the world’s first vest for camera operators that can be used both for Steadicam™ and gimbal work.… -
FLOWCINE XSPINE + XR3ACH (Our most dynamic setup)
The xSPINE is the world’s first vest for camera operators that can be used both for Steadicam™ and gimbal work.… -
FLOWCINE XSPINE + XBONE CF (Carbon fibre back mount)
The xSPINE is the world’s first vest for camera operators that can be used both for Steadicam™ and gimbal work.… -
FLOWCINE XSPINE + FRONT MOUNT (For front mounted action)
The xSPINE is the world’s first vest for camera operators that can be used both for Steadicam™ and gimbal work.… -
FLOWCINE XR3ACH
The new hybrid back mount, giving you greater boom range and more stabilization! SPECIFICATION: XR3ACH Product weight 4480 g Materials Aluminium,… -
FLOWCINE QUICK RELEASE HOOK
Key Features For Use with Puppeteer, Easyrig & Gimbal Easily Remove & Hand the Gimbal Off -
FLOWCINE PUPPETEER HANDLE BAR GRIP
Puppeteer grip for your gimbals handle bar. SPECIFICATION: PUPPETEER HANDLE BAR GRIP Shipping weight 0.27 kg Shipping dimensions 15 × 8… -
FLOWCINE PUPPETEER TOP HANDLE GRIP
Puppeteer grip for your gimbals top handle. SPECIFICATION: PUPPETEER TOP HANDLE GRIP Shipping weight 0.19 kg Shipping dimensions 15 × 8… -
FLOWCINE 2-AXIS PUPPETEER
Smooth gimbal operation with total freedom. SPECIFICATION: 2-AXIS PUPPETEER Shipping weight 2 kg Shipping dimensions 40 × 20 × 10 cm -
FLOWCINE SERENE JUBILEE KITS
Two great Serene-based kits, to celebrate the Serenes 5 year anniversary! -
FLOWCINE SERENE BUNGEE GRIP
The Serene bungee grip is a small hook that holds the bungee cord in place. SPECIFICATION: SERENE BUNGEE GRIP Shipping weight… -
FLOWCINE SERENE TOUGH BANDS
Toughen up your Serene set-up. SPECIFICATION: SERENE TOUGH BANDS Shipping weight 0.5 kg Shipping dimensions 15 × 10 × 5 cm -
FLOWCINE SERENE EXTENSION ARM
Maximize your reach by adding the Extension Arm. Hastag : Flowcine India, Xarm, Black Arm, Dual Black Arm, Serene, XSPINE,… -
FLOWCINE SERENE
SPECIFICATION: SERENE Max load 19.5kg / 43lbs Min load 6kg / 13lbs Weight 1265g Material Aluminium, Carbon Steel, Stainless Steel, EPDM… -
FLOWCINE THE DUAL BLACK
The Dual Black is a twin arm 4-axis dampening system, built for the very large remote heads. -
FLOWCINE BLACK T-NUTS
The Black T-nut is a clever M12x1.75 nut for tool less or 19mm wrench tightening. -
FLOWCINE BLACK PRO CLAMP DUAL
SPECIFICATION: BLACK PRO CLAMP DUAL Shipping weight 1 kg Shipping dimensions 12 × 18 × 5 cm -
FLOWCINE BLACK PRO CLAMP SINGLE
SPECIFICATION: BLACK PRO CLAMP SINGLE Shipping weight 0.5 kg Shipping dimensions 11 × 12 × 5 cm -
FLOWCINE UNIVERSAL RACK FLOWCINE EDITION
SPECIFICATION: UNIVERSAL RACK FLOWCINE EDITION Shipping weight 2.6 kg Shipping dimensions 30 × 10 × 11 cm -
FLOWCINE STUB MOUNT
The Flowcine Stub mount is a small lightweight 50mm tube that you can attach through a car’s tow eye bolt… -
FLOWCINE RIGID NOSE MOUNT
SPECIFICATION: RIGID NOSE MOUNT Shipping weight 0.7 kg Shipping dimensions 30 × 20 × 10 cm -
FLOWCINE FRONT EXTENSION BLOCK
Extend your Black to accommodate a larger size gimbal. RECOMMENDED MAX LOADS: Bleow are the recommended max loads (including vibration… -
FLOWCINE 45MM EXTENSION RODS
SPECIFICATION: 45MM EXTENSION RODS Shipping weight 0.2 kg Shipping dimensions 10 × 10 × 10 cm -
FLOWCINE BLACK MITCHELL PLATE
SPECIFICATION: BLACK MITCHELL PLATE Shipping weight 0.2 kg Shipping dimensions 20 × 20 × 5 cm -
FLOWCINE MITCHELL MALE TO BOOM ADAPTER
SPECIFICATION: MITCHELL MALE TO BOOM ADAPTER Shipping weight 1.6 kg Shipping dimensions 25.5 × 15.5 × 15.5 cm -
FLOWCINE MALE MITCHELL MOUNT
SPECIFICATION: MALE MITCHELL MOUNT Shipping weight 0.8 kg Shipping dimensions 16 × 16 × 6 cm -
FLOWCINE FEMALE MITCHELL MOUNT
If your gimbal mounts with a Mitchell mount, this is the option you’re looking for SPECIFICATION: FEMALE MITCHELL MOUNT Shipping weight… -
FLOWCINE BLACK WIRE ANTI-VIBRATION MOUNT
WIRE AVM WEIGHT RANGES: The Wire AVMs are available in five different weight ranges. Pick the one that best match… -
FLOWCINE TRANQUILIZER PAN BARRELS
The Pan Barrels are the links that run around the Tranquilizer, dampening the pan axis. Gimbals/remote heads with stronger pan motors… -
FLOWCINE TRANQUILIZER
The Flowcine Tranquilizer is the next-generation of vibration isolators, specifically designed around the geometry of a electronic gimbal device. TRANQUILIZER… -
FLOWCINE THE BLACK ARM
The Black arm is a 3-axis dampening system with a additional vibration mount for stabilizing roll and tilt errors as… -
FLOWCINE 303® MARINE AEROSPACE PROTECTANT
Use the Aerospace Protectant fluid to keep you spring cores in top condition! -
FLOWCINE XADJUST
Updated socket block adjustment screws. INCLUDED IN THE BOX, FRONT MOUNT 2 x 1-¼”-20 UNC 30mm adjustment knob INCLUDED IN… -
FLOWCINE XSOCKET
INCLUDED IN THE BOX 1 x xSOCKET female block 1 x 1-¼”-20 UNC 40mm adjustment knob 1 x 1-¼”-20 UNC… -
FLOWCINE XPEG BABYPIN
The xPEG Babypin is a hook that you can attach wherever there is a baby pin, where you can hang… -
FLOWCINE XPEG AND XPEG RIP-TIE KIT
The xPEG is a hook that you mount on your cart, where you can hang your Steadicam arm. The xPEG… -
FLOWCINE XPEG RIP-TIE
The xPEG Rip-Tie allows the operator to tighten up the arm at the bottom shelf of the cart. SPECIFICATION: XPEG RIP-TIE… -
FLOWCINE XPEG
The xPEG is a hook that you mount on your cart, where you can hang your Steadicam arm. -
FLOWCINE XDROP
The xDrop is a male to female socket block connection bracket that drops the arm connection 85mm / 3.4″. INCLUDED… -
FLOWCINE XARM WINTER SOFTSHELL COVER
A heated cover for your xARM, used in cold environments. SPECIFICATION: WINTER SOFTSHELL COVER Shipping weight 0.5 kg Shipping dimensions 40… -
-
FLOWCINE XARM SUPER-HIGH/LOW MODE LINK BRACKET
INCLUDED IN THE BOX 1 x xARM link bracket SPECIFICATION: SUPER-HIGH/LOW MODE LINK BRACKET Shipping weight 0.3 kg Shipping dimensions… -
FLOWCINE XARM LOW MODE GRIP HANDLE
INCLUDED IN THE BOX 1 x Grip handle bar with 44 x UNC threads 1 x Arm post handle bar… -
FLOWCINE ARM POSTS
INCLUDED IN THE BOX 1 x 265mm long arm post 1 x 165mm long arm post 2 x Post grips -
FLOWCINE ARM POST HIGH/LOW MODE KIT
Complete kit of arm posts, link bracket and grip handle, for all possible high/low mode configurations. [embed]https://youtu.be/rSECk375pxM[/embed] Arm post high/low… -
FLOWCINE XMOUNT MITCHELL ADAPTER
SPECIFICATION: Material Stainless steel, titanium plated Weight 1622 g Dimensions Weight 2 kg Dimensions 25 × 21 × 20 cm -
FLOWCINE XMOUNT
The xMOUNT is a highly robust hard mount for Steadicam(™) usage, where the operator can easily dial in roll and… -
FLOWCINE XARM SPRING CORES
The xARM Spring cores are available in the following colors/weight ranges: Teal 8-14 Kg / 17.5-31 Lbs Green 14-19.5 Kg… -
FLOWCINE XARM
FEATURES IN SHORT Large range of different lifting capacities in one single arm. Up to 29 Kg / 64 Lbs…