Freefly MoviPro – Gimbal Only (No Batteries)

Freefly Systems Authorised Distributor
in stock
SKU: 950-00057

Key Features

  • Innovative structural design for ease of use, convenience, strength, versatility
  • Dual Hot Swappable 22.5v 1.8Ah Batteries with status indicators
  • Integrated focus / iris / zoom controller
  • Integrated screen for tuning / customization / monitoring
  • Increased motor torque
  • 12-14v 6A D-Tap output for camera power
  • Dual 12V D-Tap output for accessory power (1A and 2A)
  • Ultra fast
  • Full stiffness and filter Autotune in ~5 seconds
  • MoviPro mobile applications (iOS, Android)
  • Majestic Mode
  • Timelapse
  • Dual GPS (top and bottom) for solid signal in Sky or GroundView
  • Full Red RCP2 integration (Focus, Iris, ISO, Start stop, etc)
  • Internal long range 2.4GHz frequency hopping radio for connection to MIMIC
  • Multiple handle options (Movi RING Pro, Low Profile Handle, Classic Handle)
Categories: , , Tag:

Description

Freefly MoviPro – Gimbal Only Overview

At the heart of FREEFLY‘s MōVI Pro system is the gimbal unit. Using the “Toad in the Hole” quick release system, this gimbal can be attached to handles, aerial platforms, or terrestrial vehicles for stable, professional shots. The MōVI Pro motorized gimbal stabilizer steadies cameras weighing up to 15 lb, rendering it compatible with mirrorless all the way up to smaller cinema cameras. With separately available battery options, the camera and essential accessories can be powered without adding any bulk to the MōVI Pro via its D-Tap output port.

Power Surge Firmware Update

The newest firmware update gives the MoVI Pro motor a power boost to increase camera control. Hold your top speed for longer and recover faster thanks to Maniac Mode 2.0, which increases time at peak torque for all three motors. The motor temperature estimator has been reengineered to sustain maximum torque for longer while protecting the motors. On-screen display control can be facilitated via MoVI Controller when filming with the FREEFLY Ember, Panasonic BGH1, and Panasonic BS1H with the Entire Air Commander.

Versatile “Toad in the Hole” Design

The MōVI Pro is capable of turning 180° to quickly transition from upright to inverted mounting modes and transition from handheld to TERO-mounted configurations. Handle configuration options include the RING Pro, skate, and classic modes. Mount the gimbal onto a drone and use the dual GPS units on the top and bottom for solid signal in both Sky or GroundView.

3-Axis Lens Control

Built into the camera stage is a fully integrated lens control system. Use the internal, long-range 2.4 GHz frequency hopping signal to connect to the separately available MIMIC, Mōvi controller, or a combination of the two.

RED RCP2 Integration

Access RED camera controls like focus, iris, ISO, and start/stop thanks to the integrated RCP2 control. Use the Mōvi or MIMIC controller to adjust those settings from hundreds of feet away.

Built-In Screen

  • Gives the user quick access to important information
  • Tune/adjust parameters on the fly without a phone or computer
  • Enter majestic angle or time-lapse mode
  • Pan, tilt, roll balancing, and stiffness
  • Full stiffness and filter auto-tune in approximately 10 seconds

Improved Stability, Increased Torque

High-quality sensors with precise calibration allow for smooth performance even during the most demanding shots with a 60 dB at 1 Hz disturbance rejection. The Pro features twice the torque of previous gimbal motors thanks to its direct-drive brushless motors.

Power Capabilities and Compatibility

⇒The dual battery plates are hot-swappable for easy replacement while shooting in the field. They are compatible with separately available Mōvi Pro, SL4-Ground, and TB50/55 batteries.

⇒Three D-Tap outputs and one USB output on the gimbal provide the camera and any attached accessories with power.

App Control

Tune and customize your gimbal in real time using the iOS and Android compatible Mōvi Pro App. Configure your time-lapse settings and monitor battery status all from your phone, which is especially useful when your gimbal is mounted on the TERO vehicle or a high-powered drone.

Key Specs

Gimbal Design
Single Handgrip
Load Capacity
15 lb / 6.8 kg
Number of Axes
3: Pitch (Tilt), Roll, Yaw (Pan)
Wireless Protocol
Wi-Fi (Unspecified Type)
Weight
6.0 lb / 2.7 kg

Gimbal

Load Capacity
15 lb / 6.8 kg
Number of Axes
3: Pitch (Tilt), Roll, Yaw (Pan)

Compatibility

Camera Control
On Compatible Models

Connectivity

Inputs/Outputs
1x D-Tap (12 VDC Power) Input
2x D-Tap (12 VDC Power) Output
Wireless Protocol
Wi-Fi (Unspecified Type)

General

Display Type
No
Dimensions
7.7 x 7.9 x 6.9″ / 19.6 x 20 x 17.5 cm
Weight
6.0 lb / 2.7 kg

Packaging Info

Package Weight
10.175 lb
Box Dimensions (LxWxH)
22.5 x 18.5 x 9.1″

In the box

  • Mōvi Pro Gimbal*
  • Qty 1 – Mōvi Pro Adjustable Camera Plate
  • Qty 1 – Mōvi Adjustable Top Camera Plate
  • Qty 1 – Mōvi Hot Shoe Mount
  • Qty 1 – COM to Mōvi Controller Receiver Cable
  • Qty 1 – Mōvi Rod Mount Adapter
  • Qty 2 – Bolt ⅜ -16 x ⅝”
  • Qty 2 – Bolt ¼ -20 x ½”
  • Qty 2 – Bolt ¼ -20 x ⅜”
  • Qty 1 – 2.00mm Hex Driver
  • Qty 1 – 2.50mm Hex Driver

#FreeflyMoviPro #Cinematography #Filmmaking #Stabilizer #CameraGear #FilmProduction #VideoProduction #DroneFilming #MotionControl #Filmmaker #CreativeFilmmaking #CinematicShots #ProfessionalVideo #VisualStorytelling #CameraStabilization #FilmmakingGear #AerialCinematography #VideoGear #ProductionEquipment #FilmIndustry

Tags:

Sign In

Don't have an account yet? Register

Forgot password?

Register

Reset Password

Please enter your username or email address, you will receive a link to create a new password via email.

x

Theme Settings