Tiltaing Sony a6 Series Kit C – Tilta Gray
- Cage for Select a6000 Series Cameras
- Quick Release Top Handle, Cable Clamp
- Baseplate, Rods, Arca & Manfrotto Plates
- F570 Side Power Handle with Run/Stop
- Micro-HDMI Adapter, Run/Stop Cable
- 1/4″-20 and 3/8″-16 Threads, Shoe Mounts
Featuring a Tilta gray finish and a variety of mounting options, the extensive Camera Cage Kit C from Tilta is designed to provide protection and accessory mounting for your Sony a6000, a6100, a6300, a6400, or a6500 camera. The kit includes a formfitting camera cage, a baseplate, two 15mm rods, a quick release top handle, a side power handle for F570 battery and run/stop function, Arca- and Manfrotto-type quick release plates, a micro-HDMI to HDMI adapter, and a coiled run/stop cable.
The cage features multiple 1/4″-20 and 3/8″-16 threads and a shoe mount for accessories, and the top handle also features multiple 1/4″-20 and 3/8″-16 threads, a 15mm rod port, and two additional shoe mounts. The power handle provides power to your camera or accessories via a separately available F570 battery, and it can also control the run/stop function of the camera using the included cable. The micro-HDMI to HDMI adapter allows you to plug in a standard HDMI cable and protect it from pulls. The baseplate mounts the camera and includes two 8″ long 15mm rods for attaching additional accessories. The bottom plate features multiple mounting holes for attaching to a tripod, shoulder rig, or gimbal using the included Manfrotto- or Arca-style plates.
Tilta Full Camera Cage for Sony a6000 Series (Tilta Gray)
Featuring a Tilta gray finish, this Full Camera Cage from Tilta is a formfitting camera cage designed to provide protection and accessory mounting for your Sony a6000, a6100, a6300, a6400, or a6500 camera.
The cage features multiple 1/4″-20 and 3/8″-16 threaded mounting holes for accessories. Two shoe mounts also allow the mounting of accessories, providing a sturdy frame that won’t stress your camera’s body. The bottom of the cage features multiple mounting holes for attaching to a tripod plate, shoulder rig, or gimbal. A hand strap is included to secure the cage, and you can attach optional accessories such as top and side handles to expand your kit.
Tilta Quick Release Top Handle for BMPCC 4K Cage (Tilta Gray)
Carry and stabilize your Blackmagic Design Pocket Cinema Camera 4K with this lightweight Tilta gray Quick Release Top Handle from Tilta. The quick release handle’s features include two shoe mounts, a 15mm rod port, multiple 1/4″-20 and 3/8″-16 threads, and a 3/8″-16 thread with locating pins.
The aluminum and stainless steel handle attaches to your camera cage using the included spring-loaded thumbscrew. The 15mm rod port features a rod locking screw to add a rod to the handle. There is one 3/8″-16 thread with locating pins on the front of the handle to mount a separately available Tilta cage rod mount.
Tilta HDMI Cable Clamp for Sony a6000 Series Cage (Tilta Gray)
This Tilta HDMI Cable Clamp, in Tilta gray, mounts on the side of the Tilta a6000 series cage and allows you to clamp your HDMI cable connector to prevent accidental removal. It attaches to the cage using two included screws, and your cable is securely clamped by tightening a third screw. The a6000 series cage comes in multiple configurations. The standard one is MFR# TA-T27-FCC-G.
Tilta HDMI-01-M HDMI to Micro-HDMI Adapter
Simplify camera connectivity with the Tilta HDMI-01-M HDMI to Micro-HDMI Adapter. It plugs into the micro-HDMI port on your camera and provides a standard HDMI port to connect your standard HDMI cable to. Its universal compatibility makes it easy to slip through a camera cage to connect to and detach from your mounted camera.
Tilta Sony a7/a9 Series Run/Stop Cable for Wooden Handle 2.0 (14″)
The 14″ Sony a7/a9 Series Run/Stop Cable for Wooden Handle 2.0 from Tilta is used to connect a right-side Tilta Wooden Handle 2.0 to a Sony a7/a9 Series camera.
The cable is designed with one seven-pin LEMO-type connector (right angle) and one micro-USB connector (straight). This coiled cable will trigger the run/stop function on the camera.
Tiltaing 15mm LWS Baseplate Type II (Tilta Gray)
This Tiltaing 15mm LWS Baseplate Type II from Tilta features a flat gray finish and two mounting surfaces. The top of the baseplate allows for mounting of Tiltaing half and full camera cages for Sharp 8K, Panasonic GH5, Fuji XT3, Nikon Z7, and Sony a6/a7/a9 cameras. The bottom of the baseplate mounts on Tilta standard dovetails. The bottom also incorporates three 1/4″-20 threaded holes for mounting the baseplate directly on a tripod. Built into the baseplate is a pair LWS 15mm rod clamps with spring-loaded locking levers.
Tilta 15mm Bottom Single Rod Holder for BMPCC 4K Full or Half Cage
Mount a 15mm rod onto the bottom of your Blackmagic Pocket Cinema Camera 4K cage or half cage with this lightweight 15mm Bottom Single Rod Holder from Tilta. The aluminum and stainless steel rod holder attaches to the cage bottom with the included mounting screw, and a hex screw is used to tighten the holder around the rod.
Tilta Threaded 15mm Rod (Black, 8″, Single)
Tilta’s 8″ Threaded 15mm Rod is a 8″ rod with female threading on both ends. This allows you to use optional threaded rod adapters to extend the length. As a standard practice, Tilta chamfers one end of their rods and leaves the other end with a straight cut. The chamfering makes it easier to slide accessories onto the rod, while the end with the straight cut makes for a smoother rod join.
The rod is made from machined aluminum for a balance between weight and strength, and then anodized black for wear and corrosion resistance. Please note that there is no industry-wide standard for support rod threading, so when sourcing optional rod extenders, it is best to stay within one brand.
Tilta Full Camera Cage For Sony A6000 Series (Tilta Gray) Specs
|Camera Compatibility||Sony a6000, Sony a6300, Sony a6400, Sony a6500, Sony a6600|
|Accessory Mounting||Multiple x 1/4″-20 Thread, Multiple x 3/8″-16 Thread|
|Camera Mounting||1/4″-20 Screw|
|Shoe Mounting||Top: 2 x Cold Shoe|
|Dimensions||Not Specified by Manufacturer|
|Weight||Not Specified by Manufacturer|
|Package Weight||0.815 lb|
|Box Dimensions (LxWxH)||7.6 x 5.7 x 3.6″|
Tilta Quick Release Top Handle For BMPCC 4K Cage (Tilta Gray) Specs
|Grip Type||Topside Handle with Cheeseplate-Style Handle|
|Attachment Method||Attaches via 1 x Built-In Screw (Unspecified Type)|
|Compatibility||Attaches onto Camcorder Support for:
Blackmagic Pocket Cinema Camera 4K
|Rod Standard||15 mm Single Rod|
|Rod Ports||1 x 15 mm Rod Port|
|Accessory Mounting||Multiple x 1/4″-20 Thread
Multiple x 3/8″-16 Thread
|Shoe Mounting||2 x Built-In Cold Shoe Slot|
|Dimensions||5.6 x 2.8 x 0.8″ / 14.3 x 7.1 x 1.9 cm|
|Weight||6.1 oz / 172.8 g|
|Package Weight||0.5 lb|
|Box Dimensions (LxWxH)||7.1 x 4.2 x 1.8″|
Tilta HDMI Cable Clamp For Sony A6000 Series Cage (Tilta Gray) Specs
|Material of Construction||Aluminum, Stainless Steel|
|Package Weight||0.05 lb|
|Box Dimensions (LxWxH)||5.25 x 2.75 x 0.1″|
Tilta HDMI-01-M HDMI To Micro-HDMI Adapter Specs
|Connector 1||1 x HDMI Female|
|Connector 2||1 x Micro-HDMI Male|
|Package Weight||0.045 lb|
|Box Dimensions (LxWxH)||6.6 x 4.25 x 0.95″|
Tilta Sony A7/A9 Series Run/Stop Cable For Wooden Handle 2.0 (14″) Specs
|Connectors||7-pin LEMO type, micro-USB|
|Cable Length||14″ / 35.6 cm|
|Weight||1.1 oz / 31 g|
|Package Weight||0.08 lb|
|Box Dimensions (LxWxH)||4.5 x 2.9 x 0.85″|
Tiltaing 15mm LWS Baseplate Type II (Tilta Gray) Specs
|Rod Standard||15 mm LWS / 60 mm Spacing|
|Accessory Mounting||Base: 3 x 1/4″-20 Thread|
|Tripod Mounting||1/4″-20 Thread|
|Rod Ports||2 x 15 mm Rod Port|
|Package Weight||0.735 lb|
|Box Dimensions (LxWxH)||6.9 x 4.3 x 2.7″|
Tilta 15mm Bottom Single Rod Holder For BMPCC 4K Full Or Half Cage Specs
|Material of Construction||Aluminum, Stainless Steel|
|Rod Standard||15 mm|
|Weight||0.6 oz / 15.9 g|
|Package Weight||0.09 lb|
|Box Dimensions (LxWxH)||3.85 x 2.4 x 1″|
Tilta Threaded 15mm Rod (Black, 8″, Single) Specs
|Length||7.87″ / 200 mm|
|Thread Type||Female / Female|
|Number of Rods||1|
|Package Weight||0.15 lb|
|Box Dimensions (LxWxH)||8 x 5 x 0.2″|