Tiltaing Panasonic GH Series Kit C

Gear up your Panasonic GH4, GH5, or GH5S camera with this dedicated dark gray Cage for Panasonic GH Series from Tilta. With its formfitting full-frame design, the cage protects your camera around the top, bottom, and sides without interfering with its operation. The cage provides two cold shoe mounts and multiple 1/4″-20 and 3/8″-16 mounting threads so you can expand your rig with your choice of optional accessories including top and side handles, monitors, and microphones.

The base of the cage also provides several mounting holes so you can easily fine-tune the balance of your setup when mounting your camera on a gimbal. A variety of optional baseplates can be attached to the bottom of the cage, allowing for custom configurations. A Tiltaing hand strap is included in the package.

Carry and stabilize your Blackmagic Design Pocket Cinema Camera 4K with this lightweight Tilta gray Quick Release Top Handle from Tilta. The quick release handle’s features include two shoe mounts, a 15mm rod port, multiple 1/4″-20 and 3/8″-16 threads, and a 3/8″-16 thread with locating pins.

The aluminum and stainless steel handle attaches to your camera cage using the included spring-loaded thumbscrew. The 15mm rod port features a rod locking screw to add a rod to the handle. There is one 3/8″-16 thread with locating pins on the front of the handle to mount a separately available Tilta cage rod mount.

This HDMI Male to HDMI Female Cable for Panasonic GH Series Cages from Tilta is primarily designed to connect to your camera inside the Tiltaing cage, providing you with an ergonomic method of wiring your camera to an external HDMI monitor. However, you can use this cable to connect any HDMI-compatible device to an HDMI-compatible display if needed. Simply plug the male HDMI end into the camera or other HDMI source, and connect an (optional) HDMI cable from the female port to your display.

Pair the versatile Tiltaing Side Focus Handle Type I from Tilta with a Nucleus Nano motor for fingertip focus control and with a Nucleus Nano R/S cable for a record start/stop button with compatible cameras. Powered by a separately available F570 L-series type battery, this Tilta gray handle slides onto the base of a half or full Tiltaing camera cage.

This cage component features a knurled focus wheel, an 8V micro-USB output, a 12V output, and a rubberized surface for a secure grip.

This Tiltaing 15mm LWS Baseplate Type II from Tilta features a flat gray finish and two mounting surfaces. The top of the baseplate allows for mounting of Tiltaing half and full camera cages for Sharp 8K, Panasonic GH5, Fuji XT3, Nikon Z7, and Sony a6/a7/a9 cameras. The bottom of the baseplate mounts on Tilta standard dovetails. The bottom also incorporates three 1/4″-20 threaded holes for mounting the baseplate directly on a tripod. Built into the baseplate is a pair LWS 15mm rod clamps with spring-loaded locking levers.

Custom build your Tiltaing camera rig with the Manfrotto compatible Quick Release Plate from Tilta. With this plate attached directly to the bottom of your compatible Tiltaing camera cage, you will be able to quickly and easily mount and remove the cage from a Manfrotto support system.

Custom build your Tiltaing camera rig with the Arca-Swiss compatible Quick Release Plate from Tilta. With this plate attached directly to the bottom of your compatible Tiltaing camera cage, you will be able to quickly and easily mount and remove the cage from an Arca-Swiss support system.