Tiltaing Panasonic GH Series Kit A

Gear up your Panasonic GH4, GH5, or GH5S camera with this dedicated dark gray Cage for Panasonic GH Series from Tilta. With its formfitting full-frame design, the cage protects your camera around the top, bottom, and sides without interfering with its operation. The cage provides two cold shoe mounts and multiple 1/4″-20 and 3/8″-16 mounting threads so you can expand your rig with your choice of optional accessories including top and side handles, monitors, and microphones.

The base of the cage also provides several mounting holes so you can easily fine-tune the balance of your setup when mounting your camera on a gimbal. A variety of optional baseplates can be attached to the bottom of the cage, allowing for custom configurations. A Tiltaing hand strap is included in the package.

Carry and stabilize your Blackmagic Design Pocket Cinema Camera 4K with this lightweight Tilta gray Quick Release Top Handle from Tilta. The quick release handle’s features include two shoe mounts, a 15mm rod port, multiple 1/4″-20 and 3/8″-16 threads, and a 3/8″-16 thread with locating pins.

The aluminum and stainless steel handle attaches to your camera cage using the included spring-loaded thumbscrew. The 15mm rod port features a rod locking screw to add a rod to the handle. There is one 3/8″-16 thread with locating pins on the front of the handle to mount a separately available Tilta cage rod mount.

Attach this Tiltaing Hand Strap from Tilta to the full cage for Sony a7 or a9 cameras using the cage’s strap slots for additional grip security while hand-holding your rig.

Custom build your Tiltaing camera rig with the Arca-Swiss compatible Quick Release Plate from Tilta. With this plate attached directly to the bottom of your compatible Tiltaing camera cage, you will be able to quickly and easily mount and remove the cage from an Arca-Swiss support system.

Custom build your Tiltaing camera rig with the Manfrotto compatible Quick Release Plate from Tilta. With this plate attached directly to the bottom of your compatible Tiltaing camera cage, you will be able to quickly and easily mount and remove the cage from a Manfrotto support system.

This HDMI Male to HDMI Female Cable for Panasonic GH Series Cages from Tilta is primarily designed to connect to your camera inside the Tiltaing cage, providing you with an ergonomic method of wiring your camera to an external HDMI monitor. However, you can use this cable to connect any HDMI-compatible device to an HDMI-compatible display if needed. Simply plug the male HDMI end into the camera or other HDMI source, and connect an (optional) HDMI cable from the female port to your display.