Smartsystem ARMX1

Smart System Authorised Distributor
in stock

Key Features

  • Double section articulated stabilization arm with an ultimate payload of 34kg (74.9lbs) based on an exclusive Patented Design.
  • Extremely light and compact: it’s one of the smallest and lightest stabilizer arm in the market (only 45mm / 1.77″of width)
  • Exclusive X-Tune system allows the operator to set up Arm X1 to obtain the correct dynamic response for its needs.
  • Completely milled from highest quality Ergal 7075 aluminum, shot peened and hard anodized for ultimate strength and lightness (only 4.5kg / 9.92lbs in its heavier configuration).
  • Equipped with Patent Pending DynaSpring Technology that dynamically adapt the answer of the springs all over the boom range
  • Perfectly compatible with every type of professional stabilizer Vest or Sled on the market.
Categories: , , Tag:

Description

SmartSystem 2418 Overview

Fly your cine camera with precision and confidence using the Arm X1 Professional Stabilization Arm from SmartSystem. Its fine-tuning system enables you to perfectly match the mass of your rig with the appropriate level of resistance, resulting in the state of equilibrium known as critical damping.

Its 7075 aluminum alloy, rated higher than aircraft-grade, has the Brinnell hardness, fatigue strength, and tensile strength of carbon steel yet without the weight. It is outfitted with an industry-standard mating block that can easily be switched from regular to goofy.

High-Grade 7075 Aluminum Alloy

The Arm X1 is constructed from 7075 aluminum, which is classified as superior to aircraft-grade aluminum. It has a Brinnel hardness, fatigue strength, and tensile strength over 60% higher than those of 6082 high-quality aluminum.

Fine-Tuned Resistance

A force-multiplier control enables the user to precisely match the resistance with the mass of your rig. This on-the-go capability comes in handy when doing a lens swap, removing a matte box, or other alterations that affect the mass of the payload. Finding the balance between too much resistance, which produces oscillations, and too little, which creates a lagging effect, is made simple by the Arm X1’s XTune system.

Payload Range of 13.2 to 74.9 lb

The arm supports a 60 lb weight range, suitable for a wide array of rigs.

Boom Range

The Arm X1 has a boom range of 28.5″, enabling you to raise the camera for a high-angle shot, or lower it down to shoot up at a subject.

Italian Manufacturing

Every component of the Arm X1 is machined in the company’s own factory in Italy.

◊Specification◊

General
Compatibility
Not Specified by Manufacturer
Boom Range
28.5 in
Minimum Load
13.2 lb / 6 kg
Physical
Mounting
1x Industry Standard Mating Block
Material of Construction
7075 Aluminum
Dimensions
1.77″ / 44.96 mm (Arm Width)
Weight
9.92 lb / 4.5 kg (In Heaviest Configuration)
Packaging Info
Package Weight
27.545 lb
Box Dimensions (LxWxH)
34.1 x 18.2 x 6.8″

In the box

  • 1x ArmX1 equipped with DynaSpring
  • 1x Standard 5/8″ arm post (click here for additional Arm Posts)
  • 1x Standard Ergal 7075 mating block
  • 4x Blue Springs
  • 4x Black Springs
  • 1x Hard case
  • 1x Allen Key #5 for Spring Preload and XTune
  • 1x Allen Key #3 for Arm Post friction tuning

#SmartsystemARMX1 #TechnologyInnovation #SmartHome #HomeAutomation #FutureTech #ARMSolutions #TechGadgets #SmartDevices #HomeTech #InnovativeDesign #TechTrends #SmartLiving #DigitalHome #ConnectedDevices #SmartSolutions #TechLifestyle #HomeImprovement #GadgetGoals #SmartHomeTech #NextGenTechnology

Tags:

Sign In

Don't have an account yet? Register

Forgot password?

Register

Reset Password

Please enter your username or email address, you will receive a link to create a new password via email.

x

Theme Settings